A micromechanical model with strong discontinuities for failure in nonwovens at finite deformations

Abstract

a b s t r a c tThis paper presents a new methodology to model failure phenomena in nonwoven materials with a random network microstructure at finite deformations. The recently developed homogenization technique for nonwoven materials (Raina and Linder, 2014) is combined with an enhanced deformation gradient arising due to strong discontinuities within the bulk. This allows to capture the anisotropic and nonlinear material bulk response with propagating cracks in the failing nonwoven at finite strains. The homogenization technique averages the microscale one-dimensional linear response over an orientation space to yield an accurate macroscale nonlinear behavior. Fiber reorientation and straightening phenomena are incorporated in an orientation space to account for non-affine deformation in a phenomenological manner. The failure in the form of cracks is incorporated locally as displacement jumps, so-called strong discontinuities. The local nature of displacement jumps allows their static condensation from the global governing equations, resulting in a compact and computationally efficient formulation. The computation of an objective enhanced deformation gradient, at a material point where failure is detected, follows the well-known incorporation of constant and linear separation modes directly into the finite element. The orientation space is subjected to this enhanced deformation gradient to yield the corresponding Kirchhoff stress tensor and elasticity modulus. Based on a micromechanically computed fracture strength, the proposed methodology is verified in terms of quantitative comparisons of the simulation results with experimental data from the literature.

On the enhancement of low-order mixed finite element methods for the large deformation analysis of diffusion in solids

“…χ is a material‐specific and temperature‐dependent interaction parameter accounting for the disaffinity between polymer and fluid. Note that some newer models for gels account for phenomena such as the finite extensibility of the polymer chains, also used for modeling conventional rubber , and nonwoven materials , or chain entanglement . Because the main emphasis of this work is on the numerical treatment of mixed formulations, the constitutive modeling is presented in a simplified manner and identical to expressions in .…”

A variational framework to model diffusion induced large plastic deformation and phase field fracture during initial two-phase lithiation of silicon electrodes

“…To model the propagation of a crack in a failing material, several numerical tools exist. Successful approaches are the embedded finite element method [29][30][31][32][33][34][35][36][37][38][39] or the extended finite element method [40][41][42][43], both describing the crack as a discrete entity. Alternatively, diffusive phase field approaches to fracture [44][45][46][47][48] are currently experiencing a dramatic upsurge as those do not require the geometric information of a possible failure onset and perform well when complicated failure surfaces are expected for cases when multiple cracks are present or when cracks coalesce and branch.…”

Computational aspects of growth-induced instabilities through eigenvalue analysis

“…Constitutive models for soft materials are commonly proposed on a phenomenological [43] basis, which actually in [18] is shown to be related to a molecular statistic framework, or micromechanically justified [see [27,38,39,46,47,57] among many others]. Regardless of model origin, the response of those materials is prescribed by its free energy.…”