A new pretreatment for the adhesive bonding of aluminium

Arrowsmith, D. J.; Clifford, A. W.

doi:10.1016/0143-7496(85)90044-2

Cited by 37 publications

(6 citation statements)

References 4 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…This fact indicates that the ammonia addition at 5 wt.% of ammonia (NH3/TiO2) concentration in the chemical sintering process decreases the number of cracks and increases partial coalescence. Because it is part of the neutralization process, the addition of aqueous ammonia solution can help increase of electrolyte concentration as shown in equation ( 1) [6]. The electrolytes act as a glue to induce flocculation and then to increase the viscosity of the suspension.…”

Section: Resultsmentioning

confidence: 99%

“…Up to now, TiO2 film has been coated on various substrates such as glass, plastic, nickel, titanium, and stainless steel and aluminum [5]. The coating ability of TiO2 nanoparticles onto aluminum alloy sheet depends on a pretreatment process that induces adhesive bonding between the adhesive and the adherent [6,7]. High surface energy, surface roughness and surface cleanliness of aluminum alloy affect the achievement of good adhesive bond strength [8].…”

Section: Introductionmentioning

confidence: 99%

See 1 more Smart Citation

Evaluation of Coating Ability of TiO2 Nanoparticles onto Aluminum Alloy Sheet by Physicochemical Analysis

Wetchakun

2022

Curr. Appl. Sci. Technol.

View full text Add to dashboard Cite

TiO2 nanoparticle films were successively coated onto aluminum (Al) alloy sheet using a coating technique at 150C for 5 h. This was a chemical sintering method, integrated with Al/TiO2/Al sandwich coupling and used weak acid as a binder. To evaluate the coating ability of the TiO2 nanoparticles on the aluminum alloy sheet, the physicochemical characteristics of the film samples were analyzed by means of SEM-EDS, FT-IR and XRD. The TiO2 films prepared by the coating technique at 150C for 5 h were compared with TiO2 films prepared by the doctor-blade technique at 500C for 10 min using two different organics as binders. The results of the physicochemical analysis indicated that the coating technique at 150C for 5 h provided superior coating ability of TiO2 nanoparticles onto aluminum alloy sheet than the doctor-blade technique. This may have been because of reduction of the thermal gradient at the TiO2 interface, which affected the relaxation of internal and external stresses on the TiO2 film on the aluminum alloy substrate. In this work, the TiO2 film prepared by chemical sintering method, integrated with Al/TiO2/Al sandwich coupling at 150C for 5 h using weak acid mixed with 5 wt.% ammonia as a binder proved to produce the optimum TiO2 film; however, film thickness control using the coating technique at 150C for 5 h still needs to be developed.

show abstract

Section: Resultsmentioning

confidence: 99%

Section: Introductionmentioning

confidence: 99%

Evaluation of Coating Ability of TiO2 Nanoparticles onto Aluminum Alloy Sheet by Physicochemical Analysis

Wetchakun

2022

Curr. Appl. Sci. Technol.

View full text Add to dashboard Cite

show abstract

“…In this study, the aluminum alloy sheets were abrasively cleaned by sanding to remove weak boundary layers of oxide and scale so as to enhance the mechanical interlocking between aluminum alloy sheet and adhesive. 15,16 The diphenyl-methane-diisocyanate (MDI) resin was provided by Huntsman Polyurethanes Shanghai Ltd, Shanghai, China. The color of MDI resin was dark brown and the viscosity at 25°C was 180 cps.…”

Section: Methodsmentioning

confidence: 99%

Cone calorimeter evaluation of reinforced hybrid wood–aluminum composites

Hou

Cai

Lü

2016

Journal of Fire Sciences

View full text Add to dashboard Cite

Combustion performance for three types of wood–aluminum composites was investigated using cone calorimetry tests. The results revealed that time to ignition of the specimens was increased and more than 100 times after the lamination of 1.6-mm-thick aluminum alloy sheet on the surface (from 17 to 1990 s). And residual mass of the wood–aluminum composites was improved and almost quadrupled (from 21.795% to 81.664%). The peak heat release rate, average heat release rate, total heat release, and mean mass loss rate of wood–aluminum composites with 1.6-mm-thick aluminum alloy sheet on the surface were decreased to 70.18%, 48.71%, 24.27%, and 80.60%, respectively. However, yields of both CO and CO2 are slightly improved with the increase in the thickness of aluminum alloy sheet because of incomplete combustion. The application of aluminum alloy sheets to the wood-based composites is an effective method for improving the combustion performance.

show abstract

“…Also of relevance to the present study, work conducted using SAA electrolytes have found that a post anodising treatment has been found to enhance bond strength and durability making this process comparable to that of CAA and PAA 73,102 .…”

Section: Electrochemical Treatmentsmentioning

confidence: 97%