Introduction
Rating CurvesRiver discharge, or streamflow, is one of the most important variables in hydrology and hydraulics. Hydrometric data are essential for the calibration of hydrological models, flood forecasting and warning, engineering design (of dam and bridges for example), and policy decisions related to water resources and environmental management. However, streamflow time series are not direct observations as streamflow cannot generally be continuously measured in natural rivers. Instead, the water level (also called "stage") is continuously monitored. Streamflow time series is hence derived from rating curves (Rantz, 1982; WMO, 2010), hereafter called "RCs", which are models transforming an input stage into an output discharge. These models are estimated using occasional stage-discharge measurements (also known as gaugings) and hydraulic constraints. The physical relation between discharge and stage is determined by hydraulic controls, that is, physical characteristics of the river section or channel influencing the flow: geometry, friction, longitudinal slope, head losses, etc. A hydraulic analysis of the site, through field expertize or modeling, allows identifying the succession or addition of hydraulic controls as flow increases (Le Coz et al., 2014).RCs are affected by many sources of uncertainty, including structural uncertainty (imperfection of the RC model), gaugings measurement uncertainty, and parametric uncertainty (estimation of RC parameters).