A Systematic Pipelaying Control Method Based on the Sliding Matrix for Dynamically Positioned Surface Vessels

Abstract

A pipelaying control method is presented in this paper which includes path planning, path guidance, and path tracking controller for dynamically positioned (DP) surface vessels based on the characteristics of the predefined path in marine pipelaying operation. The pipelaying control method depends on path coding, path selection logic system, and a sliding matrix. The sliding matrix contains a vessel local path and its specified control requirements, which can be updated by sliding down the waypoint table line by line as the vessel is traveling from one path to the next. A line of sight (LOS) algorithm is developed to calculate the desired vessel position and heading on a circular arc path. The motion controller, which can simultaneously control the vessel speed at the directions of surge and sway, is designed by decomposing the desired inertial resulting velocity into the desired body velocity components. A DP simulator for pipelaying operation is developed, and in order to verify the proposed method, a pipelaying simulation is carried out. The simulation results show that the proposed method enables the vessel to move along the desired path while maintaining a set crab angle, a specified speed, and a turning radius. The pipeline can be laid onto the specified waypoints even when the vessel is subjected to drift forces caused by ocean currents, wind, and waves.

Retracted: A Systematic Pipelaying Control Method Based on the Sliding Matrix for Dynamically Positioned Surface Vessels

“…This article has been retracted by Hindawi following an investigation undertaken by the publisher [1]. This investigation has uncovered evidence of one or more of the following indicators of systematic manipulation of the publication process:…”