This paper investigates an event-triggered output feedback control problem with guaranteed tracking performance for microelectromechanical system (MEMS) gyroscope subject to the lumped disturbances, including parameter uncertainties, coupling between driving mode and sensing mode, and unknown external disturbances. Firstly, to make the system output tracking errors evolve within the predetermined performance envelopes, a prescribed performance control (PPC) is employed in our controller design, such that a prescribed trajectory tracking with preselected settling time and steady-state tracking accuracy can be ensured. Besides, to simultaneously realize disturbance rejection and estimation of the immeasurable velocity state, linear extended state observers (LESOs) are designed to reconstruct the lumped disturbances and immeasurable velocity states for both MEMS gyroscope driving and sensing modes. In general, excessively energy and resource consumption are fundamentally neglected in most of the existing output feedback controllers for MEMS gyroscope, which will dramatically reduce the operational time of the close-loop system. To address this problem, we embed a fixed threshold event-triggered mechanism into the controller design procedure, such that the communication data size can be drastically reduced without sacrificing the tracking accuracy. Finally, to obtain the close-loop stability for MEMS gyroscope, robust control laws are designed to compensate for the measurement error and estimation error, meanwhile Zeno phenomena can be effectively eliminated. The simulation results and comparisons validate the effectiveness of the proposed scheme. INDEX TERMS Output feedback, event-triggered control, prescribed performance, MEMS gyroscope.