An experimental power profile of Energy Efficient Ethernet switches

Abstract

The access network is believed to account for 70-80% of the overall energy consumption of wired networks, attributable in part to the large number of small and inefficient switches deployed in typical homes and enterprises. In order to reduce the per-bit energy consumption of such devices, the Energy Efficient Ethernet (EEE) standard was approved as IEEE 802.3az in 2010 with the aim of making Ethernet devices more energy efficient. However, the potential for energy savings, and their dependence on traffic characteristics, is poorly understood. This paper undertakes a comprehensive study of the energy efficiency of EEE, and makes three new contributions: First, we perform extensive measurements on three commercial EEE switches, and show how their power consumption profile depends on factors such as port counts, traffic loads, packet sizes, and traffic burstiness. Second, we develop a simple yet powerful model that gives analytical estimates of the power consumption of EEE switches under various traffic conditions. Third, we validate the energy savings via experiments in typical deployment scenarios, and estimate the overall reduction in annual energy costs that can be realized with widespread adoption of EEE in the Internet.

Multi-Path Routing in Green Multi-Stage Upgrade for Bundled-Links SDN/OSPF-ECMP Networks

“…For example, an on-cable with 1% load and another with 100% load consume the same amount of energy. Note that in practice, each port of energy-efficient switches continues to consume the maximum power even with 10% traffic load [30]. Let ε t be the energy saving in stage t. Formally, it is computed as…”

An ant colonization routing algorithm to minimize network power consumption

“…To simulate the results of the power profile unaware algorithms we eliminated all but the most used outgoing link for each node when using SPF routing. 5 Then, we calculated the global power usage in the modified graph. We found that energy usage increases 9.5 % for links with logarithmic cost function when compared with the unmodified network using SPF as a routing algorithm.…”

“…These high energy demands have spurred successful research on all areas of networking, from the link level [3][4][5][6][7] to the networking layer adapting the routing decisions, as suggested in Gupta's seminal paper [8]. However, these traffic engineering proposals were initially constrained to the mere aggregation of traffic during low activity periods to power off some devices, as that was the only way a non-power aware device could be made to draw less power.…”

Leveraging energy saving capabilities of current EEE interfaces via pre-coalescing

“…D-Link DGS-1100-16 [15] 0 0 Level-One GEU-0820 [15] 0 0 SMC GS801 [15] 0 0 hysteresis and coalescing timers of some popular EEE devices. Note that the last three devices feature 1 Gbit/s ports, but we added them for completeness, as they have been thoroughly analyzed in [15]. This paper analyzes the energy efficiency limits of actual networking devices.…”