An indoor air quality and thermal comfort appraisal in a retrofitted university building via low-cost smart sensor

Abstract

Occupant health can be strongly influenced by indoor air quality due to time spent indoors (90%). Such quality can be impacted by indoor atmospheric pollutants present. Therefore, demand-controlled ventilation can be a key to improving indoor air quality. The main aim herein is to scrutinize measurement results of several air pollutants possibly existing inside university building including CO2, volatile organic compounds, formaldehyde, benzene, CO, PM2.5 during three measurement campaigns (March 2017, May 2017 and October–November 2017) via a smart sensor specially developed. Likewise, some factors to assess comfort such as relative humidity and ambient air temperature were examined. CO2 were found to be higher during periods of occupancy with concentrations exceeding 2000 ppm during the first campaign. As a result, the occupants felt uncomfortable. Analysis of the survey results regarding the indoor air temperature showed that 80% of occupants found the temperature during school periods to be uncomfortable. In addition, the ‘ICONE’ air containment index was extremely high, indicating that the deemed class was confined during occupancy. The outcomes will be useful for the development of future indoor air quality guidelines, ventilation design and occupant satisfaction in buildings.

Design and Implementation of College Students’ Physical Fitness Test Management System Using IoT Smart Sensors

“…Round key addition is to use the "XOR" method to import the round key into a state, and the step function is used to perform the main transition. After many iterations, packets of encrypted information can be obtained [19]. The algorithm for adding the LED wheel key is as follows:…”

Investigation of thermal comfort and adaptation among the residents of cold climate in the lower Himalayan region of eastern India

“…Apart from the comfort, air velocity could also affect the indoor air quality. 1,51 However, due to the absence of fans, very few instances were seen when there was significant air velocity around subjects and in most cases, the anemometer with a low resolution (0.1 m/s) returned zero reading showing the presence of still air condition. Nicol and Humphreys 48 further states that even at still air condition, due to convection current and bodily movement, there could be some air velocity relative to the human body, and thus cannot be treated as zero.…”

“…3 Thus, the ASHRAE Standard 55 3 prescribes a regression analysis of the thermal sensation votes (TSV) with the indoor operative temperature (t op ). However, this method of using regression analysis to find comfort (neutral) temperatures depends upon: (1) the correlation between the TSV and the t op and (2) the location of mean TSV from the thermal neutrality, and thus are prone to extraneous outputs, as seen in various research. 57 In contrast, Griffiths 58 proposed a method of calculating the comfort temperature (equation ( 10)), which contains a Griffiths' constant R representing the change in the rate of sensation votes (TSV) with the change in operative temperature considering no adaptation has taken place.…”

“…Human being spends the majority of their time inside a building. 1 In a study conducted at the University of Maryland, an average person was found to spend 86.9% of their time inside a building. 2 Thus, high quality of the indoor environment is desirable.…”

Analysis of Impact of Natural Ventilation Strategies in Ventilation Rates and Indoor Environmental Acoustics Using Sensor Measurement Data in Educational Buildings

“…These circumstances determine that one of the most demanding challenges facing educational building administrators is IAQ managing [15]. An adequate ventilation rate (VR) is one of the key elements to avoid compromising the IAQ since providing outdoor air ventilation dilutes internally generated contaminants to levels that do not cause health and comfort problems [16].…”