An investigation on mechanical property of commercial copper tube to aluminium 2025 tube plate by FWTPET process

Kannan, S.; Kumaran, S.; Kumaraswamidhas, L.A.

doi:10.1016/j.jallcom.2016.02.205

Cited by 23 publications

(6 citation statements)

References 12 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…Advances in Civil Engineering between 1,400 and 1,900 kg/m 3 as specified by the code ASTM C 330 [44] and ASTM C 567 [45][46][47][48][49][50][51][52][53][54].…”

Section: Unit Weight Of Scc Mixesmentioning

confidence: 99%

Study on Fresh and Mechanical Properties of Polyblend Self‐Compacting Concrete with Metakaolin, Lightweight Expanded Clay Aggregate, and SAP as Alternative Resources

Vivek

Karthikeyan

Kanna

et al. 2022

Advances in Civil Engineering

Self Cite

View full text Add to dashboard Cite

This paper discusses the possibility of developing a lightweight self-compacting concrete (SCC) with self-curing capabilities. In this regard, a supplementary cementitious material metakaolin, a presoaked lightweight expanded clay aggregate (LECA), and a chemical agent, superabsorbent polymer (SAP), were incorporated in developing a self-compacting self-curing concrete possessing a target strength of 60 MPa through experimental investigations, and the results are reported. The research includes an analysis of basic material properties of constituent materials including fresh properties of concrete and mechanical properties such as compressive and splitting tensile strength. It was inferred from the experimental results that utilization of self-curing agents in SCC has enhanced the mechanical properties when compared with conventional SCC mix. In particular, a combination of 0.3% SAP and 15% LECA gave the optimum strength values. The optimum usage limit of both the materials is presented in this study, and the results prove that SCC can be used as an alternate resource without disturbing the natural resources.

show abstract

“…Advances in Civil Engineering between 1,400 and 1,900 kg/m 3 as specified by the code ASTM C 330 [44] and ASTM C 567 [45][46][47][48][49][50][51][52][53][54].…”

Section: Unit Weight Of Scc Mixesmentioning

confidence: 99%

Study on Fresh and Mechanical Properties of Polyblend Self‐Compacting Concrete with Metakaolin, Lightweight Expanded Clay Aggregate, and SAP as Alternative Resources

Vivek

Karthikeyan

Kanna

et al. 2022

Advances in Civil Engineering

Self Cite

View full text Add to dashboard Cite

show abstract

“…Thus, the unique feature of FWTPET and FSP has several advantages, such as the possibility of mass production, increased safety of welders, and compliance with health-related regulations [11][12][13][14][15]. Another advantage of using FWTPET is that enhanced mechanical properties by consuming minimum energy are evident, as discussed by the researchers [16][17][18][19][20][21][22].…”

Section: Introductionmentioning

confidence: 99%

Realizing a Novel Friction Stir Processing-Enabled FWTPET Process for Strength Enhancement Using Firefly and PSO Methods

et al. 2020

Self Cite

View full text Add to dashboard Cite

The friction welding of tube to tube plate using an external tool (FWTPET) is widely deployed in several industrial applications, such as aerospace, automotive, and power plants. Moreover, for achieving a better tensile strength and hardness in the weld zone, the friction stir processing (FSP) technique was incorporated into the FWTPET process for joining aluminum alloys (AA6063 tube, AA6061 tube plate). Furthermore, it has to be noted that FWTPET was applied for joining the AA6063 tube to the AA6061 tube plate, and FSP was deployed for reinforcing the weld zone with carbon nanotube (CNT) and silicon nitride (Si3N4) particles, thereby attaining the desirable mechanical properties. Subsequently, the Taguchi L25 orthogonal array was used for identifying the most influential input and output FWTPET + FSP process parameters. Furthermore, particle swarm optimization (PSO) and the firefly algorithm (FFA) were deployed for determining the optimized input and output FWTPET + FSP process parameters. The input process parameters include CNT, Si3N4, rotational tool speed, and depth. Furthermore, the tensile strength of the welded joint was considered as the output process parameter. The process parameters predicted by PSO and FFA were compared with the experimental values. It was witnessed that deviation between the predicted and experimental values was minimal. Moreover, it was found that FFA provided a superior tensile strength prediction than PSO.

show abstract

“…The absence of solidification cracks and porous structure makes The FWTPET scheme much more attractive than The conventional friction welding approach. Moreover, welding process parameters' and its statistical significance was established using a combination of L27 orthogonal array of Taguchi method, neural model, and genetic algorithm with and without supporting block has been explored [10,11]. Moreover, The work in [7] accomplishes The finite-element determining The deformation behavior, stress, and strain distribution with The aid of The ABAQUSTM software [7].…”

Section: Introductionmentioning

confidence: 99%

“…Moreover, The work in [7] accomplishes The finite-element determining The deformation behavior, stress, and strain distribution with The aid of The ABAQUSTM software [7]. There are several current progressive works in The area of metallic materials processes of welding and joining [8][9][10][11][12][13][14][15][16].…”

Section: Introductionmentioning

confidence: 99%

“…Moreover, The vast body of published articles involving both experimental and analytical methods have dealt with clearance fits [9,[12][13][14] with a backing block with a tube-holes arrangement. Till now, very few works were reported using The interference fit method [8,10,15]. Herein, a comparison of all The variants of FWTPET was studied with an experimental and analytical approach.…”

Section: Introductionmentioning

confidence: 99%

See 1 more Smart Citation

Prediction of Tensile Strength in Friction Welding Joins Made of SA213 Tube to SA387 Tube Plate through Optimization Techniques

et al. 2019

Self Cite

View full text Add to dashboard Cite

In modern times, the Industry X.0 has emerged as the paradigm that has become the core of digital technology-driven business organizations. Further, this paper establishes a tube to tube plate friction welding technology with the help of deploying an external tool, also known referred to as the FWTPET scheme. Besides, the SA213 tube and SA387 tube plate were combined by employing a unique interference fit technique. Also, the strength of this combined portion was assessed with and without the aid of a holding block. Subsequently, the analytic optimization approaches like genetic algorithm, analysis of variance, and Taguchi L9 orthogonal array design were deployed in the prediction of the optimum joining strength. Moreover, the input parameters include the projection of the tube (mm), the rotational speed of the tool (rpm), and depth of cut (mm); besides, the tensile strength is considered as the output parameter. Also, the grain size distribution around the weld zone and the presence of base metal were measured through an optical microscope as per ASTM linear intercept method. Further, it is evident that grain refinement had occurred in the weld zone, which in turn increases the tensile strength. The exceptional weld strength (tensile strength) was obtained when joining of SA213 tube and SA387 tube plate through interference fit using a holding block without a hole in the tube. Experimentally, it was found that the achieved tensile strengths were 836.8 MPa (without a hole) and 789.35 MPa (with hole) using the holding block, respectively. Additionally, it was found that in the absence of a holding block, the achieved tensile strength is 762.2 MPa (without a hole), and 700.8 MPa (with a hole), correspondingly. The deviation of tensile strength between the predicted (genetic algorithm) and experimental was found minimal. Therefore, for achieving this strength, the suitable operating parameters set include the rotational speed of the tool (1300 rpm), projection of the tube (1 mm), and depth of cut (0.5 mm) with backing block configuration.

show abstract

An investigation on mechanical property of commercial copper tube to aluminium 2025 tube plate by FWTPET process

Cited by 23 publications

References 12 publications

Study on Fresh and Mechanical Properties of Polyblend Self‐Compacting Concrete with Metakaolin, Lightweight Expanded Clay Aggregate, and SAP as Alternative Resources

Study on Fresh and Mechanical Properties of Polyblend Self‐Compacting Concrete with Metakaolin, Lightweight Expanded Clay Aggregate, and SAP as Alternative Resources

Realizing a Novel Friction Stir Processing-Enabled FWTPET Process for Strength Enhancement Using Firefly and PSO Methods

Prediction of Tensile Strength in Friction Welding Joins Made of SA213 Tube to SA387 Tube Plate through Optimization Techniques

Contact Info

Product

Resources

About