Analysis of a Concentrating Solar Power Tower Operating with a Closed Joule Brayton Cycle and Thermal Storage

Abstract

In this paper, a solar tower power plant with a closed Joule-Brayton cycle, of 5 MW rate power, with molten salts thermal storage, located in Seville is presented. The peculiarity of the cycle, using air like fluid work, is to vary, by an auxiliary compressor and a vent valve, the pressure, so that fluid average density, at gas turbine inlet. An adjustment of the mass flow rate, in order to regulate the exit air temperature from the receiver of concentrating solar tower, is obtained. During energy surplus production, the thermal storage energy is loaded. Particular attention is placed to the energy thermal storage, which uses molten salt KCl-MgCl2, suitable for this application due to its high melting temperature, in double tank configuration. The thermodynamic model of the entire plant was implemented using Thermoflex ® software, while, for the concentrating tower, WinDelsol software was used. Using time data relating to the locations, the performance of the entire plant, during a year, has been simulated. Preliminary results show that this plant can achieve relevant benefits in total energy production and equivalent operation hours per year, therefore it is competitive with conventional energy production systems. Furthermore, a performances estimation with a cost analysis, using a LCOE parametric analysis, has been performed.

Energy Contribution of OFMSW (Organic Fraction of Municipal Solid Waste) to Energy-Environmental Sustainability in Urban Areas at Small Scale

“…Indeed, the so-called city-gas was stored in gazometers which can be found in most of the big cities around Europe and recognized as industrial heritage. Nowadays, minimization of waste production is essential for a more sustainable development of society, but energy harvesting from its flow is the most feasible option to handle the society transition [3] along with the implementation of promising renewable technologies [4,5]. Based on technical and legal regulations waste is classified for treatment or harnessing for energy purposes according to its physical and chemical composition.…”

Numerical study of nanofluid heat transfer SiO2 through a solar flat plate collector

“…Thermal solar energy has a major importance in the world because it's clean, renewable and sustainable, it has several practical and industrial applications, including electrical production, energy systems heating and cooling; in which the principal elements in these systems are the solar collectors which convert solar radiation to thermal energy then transfer it towards the carrying fluid [1]. The most known solar collectors used are the flat-plat collector.…”

Splitting the solar radiation in direct and diffuse components; insights and constrains on the clearness-diffuse fraction representation

“…A model which is capable to adapt itself to every locations and meteorological conditions. A model useful to predict the performance of heating and cooling system for building [19] or to help the design of large solar fields [20].…”