Analysis of Development Block Paving with Plastic Waste Material Adhesive Leaves

Supriyadi, Supriyadi; Sugiharto, Sugiharto; Suhartono, Edy; Sukoyo,; Dadiyono,; Aqqibaini,; Trilaksono,

doi:10.31695/ijasre.2019.33496

Cited by 2 publications

(3 citation statements)

References 0 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…However, the performance was not as good as the 100% plastic paver blocks. The composition of the mixture with 11 plastics: 1 sand is the finest yet only categorized into B-quality paver blocks [9].…”

Section: Proposed Paver Block Qualitymentioning

confidence: 99%

“…Since the production cost of fully plastic paver blocks is quite expensive, the other solution is to use plastic as a material for conventional paver block mixtures. Plastic is melted to be used as an adhesive material for concrete bricks [9]. In the process of melting, it is not required to shred the plastic, to reduce production costs.…”

Section: Potential Economic Valuementioning

confidence: 99%

See 1 more Smart Citation

Utilization of Plastic Waste as Paver Block, Economic Potential, and Environmental Impact

Rachmawati

Avianto

Mubarak

et al. 2022

JCRS

View full text Add to dashboard Cite

One of the main factors that cause environmental damage in Indonesia is waste. Reducing waste by burning it directly without an incinerator will cause air pollution for the environment. CO2 is a substance produced by a complete combustion process. The amount of waste produced by Bandung Regency reaches 1,480.1 tons/day, with 20% of the waste being plastic waste. One way to utilize plastic waste is to recycle it into materials to produce paver blocks. Producing paver blocks requires a series of machines, such as crushing machines, plastic melting machines, and pressing machines. Plastic waste that has been sorted is put into a chopping machine and cut into 10 mm pieces. The plastic that has been cut is then melted down and printed, then re-pressed with a press machine. The type of plastic used in this research is polypropylene, with a melting point of 160-170°C. The size of the paver block produced is compatible with the market size. During the production of paver blocks, the CO2 concentration was monitored to see the effect of resin melting. In the analysis of paver blocks' economic potential, we found that the production cost using plastic waste is relatively expensive compared to conventional paver blocks. However, this type of paver block is not harmful to the environment. The results of this study indicate that plastic waste paver blocks can be used as paver block materials because they have quite an impact on the environment, although their economic value cannot compete with conventional paver blocks.

show abstract

Section: Proposed Paver Block Qualitymentioning

confidence: 99%

Section: Potential Economic Valuementioning

confidence: 99%

Utilization of Plastic Waste as Paver Block, Economic Potential, and Environmental Impact

Rachmawati

Avianto

Mubarak

et al. 2022

JCRS

View full text Add to dashboard Cite

show abstract

“…Indonesia contributes significantly to the generation of plastic in the world [1,2]. Plastic shopping bags are easy to obtain for free or at low prices.…”

Section: Introductionmentioning

confidence: 99%

Physical-Mechanical Properties of Paving Block from Plastic Shopping Bags Waste and Sand

Iswahyuni

Hermiyati

Suharyanto

et al. 2020

KEM

View full text Add to dashboard Cite

Plastic shopping bags are easy to obtain for free or at low prices, hence contribute as the highest quantity among plastic waste. The plastic shopping bags waste has no economic value. Usually they are just thrown away. An alternative solution is by utilizing them to produce paving block by mixing with sands. The objective of this experiment is to evaluate the best ratio composition of plastic shopping bags waste and sand, followed by evaluation of the physical-mechanical properties of this particular paving block. Several different mixture ratios of weights of plastic shopping bag and sand were evaluated to obtain the best physical-mechanical properties of the paving block. The mixture ratios of weight of plastic shopping bags waste and sand were 1:1, 1:2, 1:3, 1:4 and 1:5, respectively. The shopping plastic bags waste was melted before mixed with sand. The different mixture ratios were mixed with same pressure. The paving block mixture with ratio of 1:4 exhibited the best physical-mechanical properties as revealed by no defect, no crack and fine surface. The compressive strength of 17.4 MPa, friction resistance of 0.138 mm/sec and water absorption of 2.518% can be achieved, which is suitable for parking area construction.

show abstract

Analysis of Development Block Paving with Plastic Waste Material Adhesive Leaves

Cited by 2 publications

References 0 publications

Utilization of Plastic Waste as Paver Block, Economic Potential, and Environmental Impact

Utilization of Plastic Waste as Paver Block, Economic Potential, and Environmental Impact

Physical-Mechanical Properties of Paving Block from Plastic Shopping Bags Waste and Sand

Contact Info

Product

Resources

About