Analysis of the Bowing Phenomenon for Thin c-Si Solar Cells using Partially Processed c-Si Solar Cells

Abstract

The silicon wafers for solar cells on which the paste is deposited experience a bowing phenomenon. The thickness of commonly used c-Si wafers is 180 μm or more. When fabricating c-Si solar cells with this wafer thickness, the bowing value is 3 mm or less and the problem does not occur. However, for the thin c-Si solar cells which are being studied recently, the output reduction due to failure during manufacture and cracking are attributed to bowing. In generally, it is known that the bowing phenomenon arises mainly from the paste applied to the back side electrode of c-Si solar cells and the effects of SiNx (silicon nitride) and the paste on the front side are not considered significant. The bowing phenomenon is caused by a difference in the coefficient of expansion between heterogeneous materials, there is the effect of bowing on the front electrode and ARC. In this paper, a partially processed c-Si solar cell was fabricated and a bowing phenomenon variation according to the wafer thicknesses was confirmed. As a result of the experiment, the measured bow value after the firing process suggests that the paste on the front-side indicates a direction different from that of the back-side paste. The bow value increases when Al paste is deposited on SiNx. The fabricated c-Si solar cell was analyzed on basis of the correlation between the bowing phenomenon of the materials and the c-Si wafer using Stoney’s equation, which is capable of analyzing the relationship between bowing and stress. As a result, the bowing phenomenon of the c-Si solar cell estimated through the experiment that the back side electrode is the important element, but also the front electrode and ARC influence the bowing phenomenon when fabricating c-Si solar cells using thin c-Si wafers.

Influência do tipo de dopante do substrato em células solares bifaciais finas

“…Outra tendência apresentada no ITRPV é a redução da espessura das lâminas de silício, que será reduzida dos atuais 180 μm para 130 μm com o objetivo de diminuir custos de produção, pois atualmente a lâmina representa da ordem de 52% dos custos de uma célula solar. Para esta última espessura, o alumínio depositado em forma de pasta de serigrafia não poderá ser utilizado como dopante tendo em vista os problemas de abaulamento das lâminas de silício [5].…”

High efficiency flexible PEDOT:PSS/silicon hybrid heterojunction solar cells by employing simple chemical approaches

“…7,9,10 However, the bowing phenomenon of thin Si wafers during high temperature processing is one of the critical issues with homojunction Si cells. 11 Researchers, therefore, are aligned towards the hybrid heterojunction solar cell (HHSC) concept, marrying organic conjugate semiconductors and inorganic Si wafers, which offers cost-effective and low-temperature swift processing. 12 It is well known that organic/Si heterojunction solar cells have great potential to meet the desirability to substitute costly and time-consuming traditional processes.…”

Cost-Effective Thin n-type Silicon Solar Cells with Rear Emitter

“…The n + pp + structure based on screen-printed Al layer cannot be applied to the thin wafers bearing in mind the wafer bowing 4 . The bow is produced during the thermal step performed to diffuse Al into a silicon in a belt furnace due to the different thermal coefficients of expansion of aluminum layer and silicon.…”