Analysis of the constraint relation between ground and self-adaptive mobile mechanism of a transformable wheel-track robot

Abstract

To maneuver in unstructured terrains where the ground might be soft, hard, flat or rough, a transformable wheel-track robot (NEZA-I) with a self-adaptive mobile mechanism is proposed and developed. The robot consists of a control system unit, two symmetric transformable wheel-track (TWT) units, and a rear-wheel unit. The TWT unit is the main mobile mechanism for the NEZA-I robot, with the rear-wheel unit acting as an assistant mechanism. Driven only by one servomotor, each TWT unit can efficiently select between track mode and wheel mode for optimal locomotion, autonomously switching locomotion mode and track configuration with changes in the terrain. In this paper, the mechanism structure, the self-adaptive drive system, the locomotion mode and posture of the NEZA-I robot are presented, the kinematic relation of the inside parts of the TWT unit is analysed, and the mathematic model of the constraint relation between the mobile mechanism and the ground, abbreviated to "MGCR model" is set up for the NEZA-I robot to go through some typical unstructured environments. The mechanism parameters, which influence the self-adaptability of the NEZA-I robot, are found and optimized. Basic experiments show that the mobile mechanism has the self-adaptability to navigate in unstructured terrains and has superior obstacle-negotiating performance, and that the MGCR model and the analysis method of mechanism parameters are reasonable. From a mechanism point of view, it can provide an idea for research on the adaptive control of the robot.self-adaptive mobile mechanism, transformable track, wheel-track hybrid robot, mechanism design Citation:Li Z Q, Ma S G, Li B, et al. Analysis of the constraint relation between ground and self-adaptive mobile mechanism of a transformable wheel-track robot.

Finite Element Analysis Based Design of Mobile Robot for Removing Plug Oil Well

“…4(a). The supporting leg could be simplified to the two-force bar [12][13][14]. The force on the pin A that is contacted with the pipe wall is analyzed in Fig.…”

Evaluation methods for the autonomy of unmanned systems

“…Some common technologies and expertise technologies of unmanned autonomous systems have attracted researchers' wide attention, such as sensing technology [54,56], human-robot interaction technology [45], information communication technology [20], path planning technology [32,57,58], multi-platform collaboration technology [15,35,36,50,59,60], movement and motion-control technology [17,61,62], autonomy energy technology [39], mission planning technology [13,16,63], and autonomous flight-control technology [31,34,64,65]. Ref.…”

Gait and simulation analysis of quadruped crawling robot based on metamorphic structure

“…Over the past few decades, extensive research has been conducted on mobile robots due to their ability to assist humans in performing hazardous tasks in complex and unpredictable environments, such as search and rescue operations, counterterrorism efforts, explosive removals, planetary exploration endeavors and so on. Based on their application scenarios and movement modes, mobile robots can be classified into wheeled robot (Chen et al , 2018; Zhang et al , 2020; Khan et al , 2021), tracked robot (Fiedeń and Bałchanowski, 2021; Cui et al , 2016; Li et al , 2011) and legged crawling robot (Xu and Ding, 2013; Su et al , 2020). These robots have shown broad applications in transportation (Fukui et al , 2020), life services (Mateo and Santivaez, 2021; Kamegawa et al , 2020) and other fields.…”