Approaches for the Elimination of Microbial Contaminants from Lippia multiflora Mold. Leaves Intended for Tea Bagging and Evaluation of Formulation

Abstract

Elimination of microorganisms from herbal products has been a major concern due to its implicated health risk to consumers. Drying of herbal materials has been employed for centuries to reduce the risk of contamination and spoilage. The present study adopted three drying approaches in an attempt to eliminate microorganisms from Lippia multiflora tea bag formulation. This study also evaluated the tea bags and optimized the extraction procedure. The L. multiflora leaves for tea bagging were air-dried and milled (A), oven-dried and milled (B), and microwaved (the milled air-dried leaves) (C). The moisture contents were determined at 105°C ± 2°C for 2 hours to constant weight. Phytochemical parameters such as phytochemical constituents, total water extractive, and pH were assessed. The microbial safety and quality of the L. multiflora tea bags were evaluated using the British Pharmacopoeia 2019 specifications. The uniformity of the mass of the formulated tea bags was also determined. Extraction from the Lippia tea bags was optimized. The results showed that using the approaches (A, B, and C) adopted for drying and processing, the moisture contents of the formulated tea bags were in the range of 9.75–10.71% w/w. All the formulated tea bags contained reducing sugars, phenolic compounds, polyuronides, flavonoids, anthracenosides, alkaloids, saponins, and phytosterols. The pH range of the formulations was 7.11–7.54, whereas the total water extractive values were in the range of 19.12–20.41% w/w. The one-way analysis of variance demonstrated no significant difference in the data obtained from the results from A, B, and C. The formulation from A was found to be unsafe for consumption due to unacceptable microbial contamination limits. Microbial load of the formulations from B and C were within the BP specifications. All the batches of the formulations passed the uniformity of mass test. An optimized extraction procedure was obtained when one tea bag was extracted in 250 mL of hot water within the specified time. L. multiflora leaves meant for tea bagging should be oven-dried or microwaved before tea bagging for safe consumption.

Antioxidant Activity and Tyrosinase Inhibitor of Red Betel Leaf Extract

“…The analysis results of the red betel leaves' water content were obtained at 7.75%, proving that drying the oven for four days at 50 o C can reduce the water content. The lower the water content obtained, the better (Kumadoh et al, 2022). Microbial contaminants in some herbal products may pose a public health risk to consumers.…”

Chitosan alchemy: transforming tissue engineering and wound healing

“… 210 The extraction methods should be optimized to eliminate any microbial contaminations. 211 Regulatory agencies should impose critical quality attributes/parameters to monitor the quality/sterility of the product. 212 The major concerns and challenges associated with translating the research based on it to market lie can be summarized in 3 categories.…”

Response to Article “Antipyretic Potential of 80% Methanol Extract and Solvent Fractions of Bersama abyssinica Fresen. (Melianthaceae) Leaves Against Yeast-Induced Pyrexia in Mice” [Response to Letter]

“…viable microbial contaminants; freeze-drying, the extract was further concentrated using a lyophilizer and this also contributes to killing microbial contaminants; Preserved in a desiccator until it was utilized to avoid physical, chemical, and biological pollutants; The laboratory room and other device were washed/polished with disinfectant. 1,[6][7][8][9] After all, we will make an effort to take into account the recommendations made for upcoming works. Finally, the authors would like to express their appreciation for the reader's input on our earlier work.…”