Autonomous Mobile Ground Control Point Improves Accuracy of Agricultural Remote Sensing through Collaboration with UAV

Abstract

Ground control points (GCPs) are critical for agricultural remote sensing that require georeferencing and calibration of images collected from an unmanned aerial vehicles (UAV) at different times. However, the conventional stationary GCPs are time-consuming and labor-intensive to measure, distribute, and collect their information in a large field setup. An autonomous mobile GCP and a collaboration strategy to communicate with the UAV were developed to improve the efficiency and accuracy of the UAV-based data collection process. Prior to actual field testing, preliminary tests were conducted using the system to show the capability of automatic path tracking by reducing the root mean square error (RMSE) for lateral deviation from 34.3 cm to 15.6 cm based on the proposed look-ahead tracking method. The tests also indicated the feasibility of moving reflectance reference panels successively along all the waypoints without having detrimental effects on pixel values in the mosaicked images, with the percentage errors in digital number values ranging from −1.1% to 0.1%. In the actual field testing, the autonomous mobile GCP was able to successfully cooperate with the UAV in real-time without any interruption, showing superior performances for georeferencing, radiometric calibration, height calibration, and temperature calibration, compared to the conventional calibration method that has stationary GCPs.

Proximal and remote sensing in plant phenomics: 20 years of progress, challenges, and perspectives

“…Systematic errors are predictable and are usually calibrated at the sensor end ( Berra and Peppa, 2020 ). Random observation errors are usually corrected by geometrically calibrating the PRS image to a known ground coordinate system (such as topographic maps and ground control points) ( Han et al., 2020 ; Liu et al., 2021b ). After preprocessing, the data processing pipeline is usually sensor specific.…”

Automated Bale Mapping Using Machine Learning and Photogrammetry

“…The method resulting from this work has utility over other geolocalization methods that utilize ground control points and image stitching [37]. The process to set up the ground control points and to obtain their coordinates can be time consuming and hard to automate [38]. The method presented here relies only on the GPS data and the imagery provided by the UAV.…”

Continued development of autonomous mobile ground control point for increasing the accuracy of unmanned aerial-vehicle-based phenotyping

“…1 UAV based remote sensing technologies, such as RGB, Multispectral, and Thermal imaging cameras, have enabled plant breeders and genetics researchers to efficiently collect large datasets of phenotype information; however, the effectiveness of this practice is limited by the accuracy of the UAV's onboard GPS and IMU systems. 2 Ground control points can be used to increase the accuracy of georeferencing but have several drawbacks. Additional labor is required to place GCPs throughout a field prior to the UAV flight mission, increasing the time and cost required to carry out data collection.…”