Batch Reverse Osmosis Desalination Modeling under a Time-Dependent Pressure Profile

Abstract

As world demand for clean water increases, reverse osmosis (RO) desalination has emerged as an attractive solution. Continuous RO is the most used desalination technology today. However, a new generation of configurations, working in unsteady-state feed concentration and pressure, have gained more attention recently, including the batch RO process. Our work presents a mathematical modeling for batch RO that offers the possibility of monitoring all variables of the process, including specific energy consumption, as a function of time and the recovery ratio. Validation is achieved by comparison with data from the experimental set-up and an existing model in the literature. Energetic comparison with continuous RO processes confirms that batch RO can be more energy efficient than can continuous RO, especially at a higher recovery ratio. It used, at recovery, 31% less energy for seawater and 19% less energy for brackish water. Modeling also proves that the batch RO process does not have to function under constant flux to deliver good energetic performance. In fact, under a linear pressure profile, batch RO can still deliver better energetic performance than can a continuous configuration. The parameters analysis shows that salinity, pump and energy recovery devices efficiencies are directly linked to the energy demand. While increasing feed volume has a limited effect after a certain volume due to dilution, it also shows, interestingly, a recovery ratio interval in which feed volume does not affect specific energy consumption.

Assessment of the Pressure Driven Membrane for the Potential Removal of Aniline from Wastewater

“…The flux of solute (J s ) across the membrane is given by the following equation [Chougradi et al, 2021]:…”

Fresh water production from atmospheric air: Technology and innovation outlook

“…Research related to these systems has been gaining momentum. This concept looks particularly attractive for discontinuous fresh water production with DESARO compared with continuous RO in seawater desalination plants, which demand continuous high water throughput ( Shrivastava and Stevens, 2018 ; Chougradi et al., 2021 ). The optimal pressure path and the average pressure over the desired permeate recovery interval can be estimated using Equation 8 .…”

Development of softening and ballasted flocculation as a pretreatment process for seawater desalination through a reverse osmosis membrane

“…Therefore, technologies that produce freshwater from the vast amount of seawater are urgently required 3 . Reverse osmosis (RO) is an energy-saving, highly economical, and energy-efficient desalination technology for seawater 4 , with a high freshwater-recovery rate 5 . Accordingly, the RO membrane process is commonly used in desalination facilities 6 and is recognized as an important technology for seawater desalination.…”