Biomechanical Evaluation of strategies for Adjacent Segment Disease after Lateral lumbar interbody fusion: is extension of pedicle screw necessary?

Abstract

Background: Adjacent segment disease (ASD) is a well-known complication after interbody fusion. Pedicle screw-rod revision possessed sufficient strength and rigidity. However, is a surgical segment with rigid fixation necessary for ASD reoperation? This study aimed to investigate the biomechanical effect on LLIF with different instrumentation for ASD treatment.Methods: A validated L2~5 finite element (FE) model was modified to simulate. ASD was considered the level cranial to the upper-instrumented segment(L3/4). Bonegraft fusion in LLIF with bilateral pedicle screw fixation (BPS) has occurred at the L4/5. The ASD segment for each group was underwent a) LLIF + posterior extension of BPS, b) PLIF + posterior extension of BPS, c) LLIF + lateral screw, d) Stand-alone LLIF. L3/4 Range of motion (ROM), interbody cage stress and strain, screw-boneinterface stress, cage-endplate interface stress, and L2/3 nucleus pulposus of intradiscal pressure (NP-IDP) analysis were calculated for the comparisons among fourmodels.Results: All reconstructive models displayed decreased motion at L3/4. In each loading condition, difference was not significant between model a and b, which providedthe maximum ROM reduction (73.8% to 97.7%, 68.3% to 98.4%, respectively). Model c also provided a significant ROM reduction (64.9% to 77.5%). Model d provided a minimal restriction of ROM (18.3% to 90.1%), which exceeded that of model a by 13.1 times in flexion-extension, 10.3 times in lateral bending and 4.8 times in rotation. Model b generated greater cage stress than other models, particularly in flexion. The maximum displacement of the cage and the peak stress of cage-endplate interface were found to be the highest in the model d in all loading conditions. For the screw bone interface, the stress was significantly greater in lateral instrumentation than that of posterior instrumentation.Conclusions: Stand-alone LLIF is likely to have limited stability, particularly in lateral bending and axial rotation. Posterior extension of BPS can provide the reliablystability and excellently protective effect on instrumentation and endplate. However, LLIF with in situ screw may be an alternative for ASD reoperation.