Capillary driven low-cost V-groove microfluidic device with high sample transport efficiency

Abstract

In this study we investigate the liquid sample delivery speed and the efficiency of microfluidic channels for low-cost and low-volume diagnostic devices driven only by capillary forces. We select open, non-porous surface grooves with a V-shaped cross section for modeling study and for sensor design. Our experimental data of liquid wicking in V-grooves show an excellent agreement with the theoretical data from the V-groove model of Rye et al. This agreement allows us to quantitatively analyze the liquid wicking speed in V-grooves. This analysis is used to generate data for the design of sensors. By combining V-groove channels and printable paper-like porous detection zones, microfluidic diagnostic sensors can be formed. Non-porous V-grooves can be fabricated easily on polymer film. Suitably long surface V-grooves allow short liquid transport time (<500 ms), thus reducing the evaporation loss of the sample during transport. Non-porous V-grooves also significantly reduce chromatographic loss of the sample during transport, therefore increasing the sample delivering efficiency. Sensors of such design are capable of conducting semi-quantitative chemical and biochemical analysis (i.e. with a calibration curve) with less than 1000 nL of sample and indicator solution in total.

Qualitative and quantitative detection of T7 bacteriophages using paper based sandwich ELISA

“…Bioassays made of disposable materials can be used for regular tests to detect blood typing, cancers, generic conditions, and epidemic diseases such as hepatitis and influenza [4,5,[7][8][9][10]. They can also be used to identify and filter heavy metals, chemical compounds and microbial activities in water.…”

Red blood cell transport mechanisms in polyester thread-based blood typing devices

“…4 below. Based on the work by Roberts et al, Khan et al [33] and Tian et al [34] have experimentally modelled liquid-penetration behaviour in V-grooves, simulating liquid movement in inter-fibre open capillaries similar to those illustrated in Fig. 4d.…”

Paper and Fiber-Based Bio-Diagnostic Platforms: Current Challenges and Future Needs

“…In 2010, Martinez et al positioned a digital valve that introduced designed gaps to separate the paper's layers, thus strategically connecting and disconnecting the flow [80]. Other groups reported approaches for controlling fluid transport by changing the geometry of the channels and altering the width, length, and thickness of the junctions in paper-based microfluidic designs [81][82][83]. Applications of the fluidic barriers made from soluble materials for carrier flow were also presented in the literature.…”