Characterization of Thermally Evaporated In₂S₃ Films for Solar Cell Application

Abstract

Indium sulphide (In 2 S 3 ) is one of the best alternatives for CdS as a buffer layer in CuInGaSe 2 -based thin film heterojunction solar cells. In this work, In 2 S 3 films were prepared by thermal evaporation of In 2 S 3 powder onto glass substrates at different temperatures that vary from 200 ∘ C to 300 ∘ C. The as-grown films were characterized using appropriate techniques to evaluate the chemical and physical properties. The X-ray diffraction analysis revealed that all the films were polycrystalline in nature with a strong (109) plane as the preferred orientation and consisted of tetragonal and cubic phases. The crystallite size and the lattice parameters are calculated. The scanning electron micrographs indicated smooth surface with fine grains. The optical analysis revealed a high optical transmittance for the layers with a direct optical band gap that varied in the range of 1.8-2.2 eV.

Enhancing The Optoelectronic Properties of Nebulizer Sprayed In2S3 Thin Films For Photodetector Applications

“…Usually In 2 S 3 gives rise to peaks at (002), (222), (400), (511) and (444) corresponding to the JCPDS card No. 65-0459[32][33][34]. In our work, the sample deposited with 0.03 M solution shows high intense peaks at 14.16°, 28.61°, 33.14°, 43.56° and 59.26° re ected from (103), (206), (220), (309) and (4012) planes con rming the formation of β…”