Coating of Li_1+x[Ni_0.85Co_0.10Mn_0.05]_1−xO₂ Cathode Active Material with Gaseous BF₃

Abstract

Ni-rich cathode active material Li 1+x [Ni 0.85 Co 0.10 Mn 0.05 ] 1−x O 2 (NCM851005) was exposed to BF 3 gas at room temperature with pressures between 25 mbar and 2478 mbar. It mainly gave an LiBF 4 coating by reaction with the basic surface lithium impurities. The electrochemical investigations up to full-cell level displayed a significantly improved long-term cycling behavior at 45 °C for only 0.08 wt% BF 3 coated NCM851005 material, compared to pristine NCM851005 material. The internal resistance of full-cells was reduced for all tested amounts of BF 3 coating (after 300 cycles: pristine NCM851005 +293% and 0.08 wt% BF 3 coated NCM851005 +133% resistance built-up). Moreover, online electrochemical mass spectrometry studies showed a reduced CO 2 release in the first cycle of half-cells built with the coated NCM851005 material compared to those with pristine NCM851005 material. The thermal annealing of the coated NCM851005 material at 200 °C or 400 °C led to a decrease of LiBF 4 , but to an increase of LiF content on the surface. However, coated NCM851005 material with thermal annealing exhibits lower discharge capacities after 250 cycles compared to NCM851005 material with equal coating amount, which were not thermally annealed.