Compact Triple/Quadruple-Band Reconfigurable Monopole Antenna for Wireless Applications

Abstract

In this paper, a compact reconfigurable tri-band/quad-band monopole antenna is presented. To achieve the multi-band behavior, two right-angled triangles were etched in a conventional rectangular patch, and a partial ground plane is used. Moreover, the proposed multi-band antenna is printed on a low cost FR4 epoxy with compact dimensions of 0.23[Formula: see text], where [Formula: see text] is calculated at the lowest resonance frequency. To provide frequency agility, a metal strip which acts as PIN diode was embedded in the frame of the modified patch. The tri-band/quad-band antenna performance in terms of reflection coefficient, radiation patterns, peak gain and efficiency was studied. The measured results are consistent with the simulated results for both cases. The simple structure and the compact size of the proposed antenna could make it a good candidate for multi-band wireless applications.

Filtenna with Frequency Reconfigurable Operation for Cognitive Radio and Wireless Applications

“…In [ 21 ], a CPW monopole antenna was used as a sensing antenna, and three narrow-band antennae covered seven sub-bands as communicating antennae, and one of them was a reconfigurable planar monopole antenna. A reconfigurable multiband monopole antenna was presented in [ 24 ] for triple/quadruple operations. A wide/dual/single band PIN-based reconfigurable monopole antenna with a band of operation (3.3–7.8 GHz) was introduced in [ 25 ].…”