Comparison Analysis of Indirect FOC Induction Motor Drive using PI, Anti-Windup and Pre Filter Schemes

Talib, Hairul Nizam; Ibrahim, Zulkifilie; Rahim, N.A.; Hasim, Ahmad Shukri Abu

doi:10.11591/ijpeds.v4i4.6250

Cited by 10 publications

(5 citation statements)

References 18 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…In this part of the simulation, the context of a machine-regulator association is chosen, the main parameters of which are grouped together in the following table 1. The adjustment of the parameters of the various regulators is made by compensation of the poles according to the parameters of the machine itself [15]. A reference speed is used to allow a progressive start to reach the nominal mechanical angular speed of the machine which is close to 150rad/s.…”

Section: Simulation Results With Fixed Nominal Mechanical Loadmentioning

confidence: 99%

Comparative study of field-oriented control of an induction machine with inter-turn short-circuit in healthy and faulty cases

Abdelouhab,

Senhaji,

Attar

et al. 2023

E3S Web of Conf.

View full text Add to dashboard Cite

The vector control of an induction machine is among the most used controls, the inter-turn short-circuit fault is a very common fault in this type of machine. Vector controllers use current regulators that are highly insensitive to internal disturbances and can therefore mask the onset of a short-circuit fault. In this article we propose simulations allowing to study the behavior of the indirect field-oriented control when an inter-turn short-circuit fault appears. The primary aim of this article is a comparative study of the effect of this type of defect on estimated quantities such as rotor flux, slip and electromagnetic torque. The results of the simulation show that these estimated quantities can be used as fault indicators instead of the stator currents. The results of this comparative study also show that the ripple of the estimated rotor flux is a very good indicator of this type of fault in this type of regulator-machine association.

show abstract

Section: Simulation Results With Fixed Nominal Mechanical Loadmentioning

confidence: 99%

Comparative study of field-oriented control of an induction machine with inter-turn short-circuit in healthy and faulty cases

Abdelouhab,

Senhaji,

Attar

et al. 2023

E3S Web of Conf.

View full text Add to dashboard Cite

show abstract

“…The mathematical model of the three phase induction motor in synchronous reference frame is given in [21]. The voltage source inverter is controlled by mean of the Space Vector Pulse Width Modulation (SVPWM) method.…”

Section: Figure 1 Flsc With Indirect Foc Methods Block Diagrammentioning

confidence: 99%

Experimental Analysis of Simplified Rules Fuzzy Logic Speed Controller for Wide Speed Range Operations

Talib

Ibrahim

Rasin

et al. 2018

IJPEDS

Self Cite

View full text Add to dashboard Cite

<p>This paper presents the experimental analysis of simplified rules Fuzzy Logic Speed Controller (FLSC) of Induction Motor drive. The maximum gain of input scaling factor, FLSC is generally limited by the coverage of universe of discoursed (UoD). Thus, to further increase the input gain scaling factor, the outer membership function need to be increased. This analysis covers various values in the range of UoD values from [-1,1] to [-5,5] for the wide speed range operations from low to rated speed ranges. The FLSC is employed to the indirect Field Oriented Control method fed by a voltage source inverter. Simulation and experimental verification is done by using Matlab/Simulink and dSPACE 1103 controller experimental rigs respectively. Based on the results, speed performance behaviours are improved over the wide speed range operations in term of rise time and setting time. The tuning approached is simple without additional algorithm for faster and more accurate response.</p>

show abstract

“…Conventional PI controllers have an undesirable influence on the system response during a parametric variation [16]; moreover the setting of PI controllers does not generally take into account the physical limitations of the system such as the maximum current and voltage. For these reasons and in order to improve the dynamic responses of the machine in closed loop, we use a PI anti-windup controller [17] illustrated in Fig. 3.…”

Section: Controller's Designs 41 Pi Anti-windup Controllermentioning

confidence: 99%

Improvement DTC for Induction Motor Drives Using Modern Speed Controllers Tuning by PSO Algorithm

Kiyyour

Laggoun

Ahmed

et al. 2023

Period. Polytech. Elec. Eng. Comp. Sci.

View full text Add to dashboard Cite

The work carried out in this paper proposes an improvement of the direct torque control (DTC) of induction machine by the design of modern, robust and more efficient controllers than the conventional PI controllers commonly used for speed control. A comparative study has been carried out using five controllers, i.e. PI anti-windup, first-order sliding mode control (SMC), second order sliding mode control (SOSMC), fuzzy logic controller (Fuzzy-PI) and hybrid Fuzzy second-order sliding mode controller (FSOSMC). An advanced optimization technique based on the particle swarm optimization (PSO) algorithm has been utilized to optimize all of these controllers, the use of PSO for the determination of the different gains used in all controllers gives on the one hand a high accuracy performance and ensures on the other hand a reliable comparison between the different controllers in their optimal states. The simulation and analysis of each method with respect to robustness to disturbances was performed externally under various operating conditions and variations of the machine parameters.

show abstract

Comparison Analysis of Indirect FOC Induction Motor Drive using PI, Anti-Windup and Pre Filter Schemes

Cited by 10 publications

References 18 publications

Comparative study of field-oriented control of an induction machine with inter-turn short-circuit in healthy and faulty cases

Comparative study of field-oriented control of an induction machine with inter-turn short-circuit in healthy and faulty cases

Experimental Analysis of Simplified Rules Fuzzy Logic Speed Controller for Wide Speed Range Operations

Improvement DTC for Induction Motor Drives Using Modern Speed Controllers Tuning by PSO Algorithm

Contact Info

Product

Resources

About