Decomposition Characteristics of the TTIP (Tetraisopropyl Orthotitanate) Precursor for Atomic Layer Deposition

Abstract

The decomposition of tetraisopropyl orthotitanate (TTIP), a representative precursor used in the atomic layer deposition (ALD) of titanium dioxide (TiO2) film, and the resulting changes in the thin film properties of the TiO2 film were investigated. TTIP was evaluated after exposure to thermal stress in an enclosed container. The vapor pressure results provide reasonable evidence that impurities are generated by the decomposition of TTIP under thermal stress. These impurities led to changes in the thermal properties of TTIP and changes in the growth rate, morphology, and composition of the thin film; in particular, these impurities increased the unstable oxidation states of Ti2+ (TiO) content in the TiO2 film. The changes in the properties of the TiO2 film resulting from the changes in the physical properties of TTIP led to a change in the properties of the device. We proved that the thermal stability of the precursor is a factor that can determine the reliability of the ALD process and the resulting thin film. Additionally, systematic evaluation of the precursor can provide useful information that can improve the development of the precursor and the consistency of the process.

Nanocavity-Mediated Purcell Enhancement of Er in TiO2 Thin Films Grown via Atomic Layer Deposition

“…The deposition process involved the use of titanium isopropoxide (TTIP) and water (H 2 O) as precursors for the thermal deposition of TiO 2 (additional growth details are discussed in Methods). − We chose TTIP as the Ti precursor to minimize impurities in the as-grown TiO 2 thin films because of its composition, which comprises only elements of carbon, hydrogen, titanium, and oxygen . For the Er doping, we selected tris­(2,2,6,6-tetramethyl-3,5-heptanedionato)­erbium (Er­(thd) 3 or Er­(tmhd) 3 ), as it can react with oxygen plasma to form atomic layers of erbium oxides, thereby incorporating erbium into various host materials. ,− In an effort to grow smooth films, we deliberately maintained the Si substrates at a temperature of 120 °C during the deposition, well below the 150–165 °C temperature range for deposition of the anatase phase TiO 2 , at the expense of amorphous growth …”

Insights from experiment and machine learning for enhanced TiO2 coated glazing for photocatalytic NOx remediation

“…The precursor bubbler temperature in the CVD process controls the amount of precursor that is transferred into the reactor during the deposition, which can be calculated from the vapour pressure curve of each precursor. [63][64][65] In this work, bubbler temperatures were chosen that would result in a range of lm thicknesses. Generally speaking, at lower bubbler temperatures, the coatings grown tended to be thinner and more compact; at moderate bubbler temperatures more nanostructured and hazy depositions were observed; at high bubbler temperatures (approaching the boiling point of the precursor) a much more cracked and powdery coating was obtained with a greater amount of carbon contamination (e.g.…”

Atomic Layer Deposition of Defective Amorphous TiOx Thin Films with Improved Photoelectrochemical Performance

“…Therefore, it is possible to deposit a defective TiO x thin film using TDMAT as a Ti precursor via ALD. Additionally, the defects in TiO x thin film extends its light absorption toward the visible region, consequently improving its PEC properties. − …”