The production of staple articles such as cable ducts offers reductions in resource and production energy consumption if the process is optimized. Side recesses made of polyvinyl chloride (PVC) have already been punched successfully as one of the process steps during the production of cable ducts. However, punching cable ducts made of flame-retardant polycarbonate/acrylonitrile–butadiene–styrene (PC/ABS) is challenging because increased burr and film formation occurs. This study introduces the correct dimensioning of the clearance as a means of reducing the burr and film formation and presents the ideal clearance dimensions. This new process design approach comprises the dimensioning of the clearance and its subsequent successful application. Tools with clearances in the relevant size range were purchased and examined by means of punching tests. The punch-outs were evaluated regarding the quality characteristics, such as the burr, film, cut surface quality, shear droop, and plastic flow characteristics. Excerpts from high-speed recordings were used to assess the punch-outs qualitatively. The burr formation is significantly decreased by the use of a correctly dimensioned clearance, allowing for the crack initiated at the punch side and the crack initiated at the die side to meet perfectly. It is assumed that film formation can be avoided via a significant reduction in the friction or heat input during the punching process.