Design of Highly Linear Broadband Continuous Mode GaN MMIC Power Amplifiers for 5G

Abstract

In this paper, we present a design approach for broadband harmonic-tuned monolithic microwave integrated circuit (MMIC) power amplifiers (PAs). Two harmonic matching networks are proposed for the realization of continuous class-B and class-F modes in an integrated PA. A design procedure is developed for integrated PAs using these matching networks to achieve high linearity, broadband operation, and compact chip area, in the presence of parasitic components and the physical limitations of the MMIC process. Two proof-of-concept fully integrated PAs are implemented in a 0.25-µm GaN-on-SiC process. Output power of 34.2-36.4 dBm with 40% to 49% power-added efficiency (PAE) is achieved in 4.2-7.0 GHz (51.6% fractional bandwidth), from the continuous class-B PA with only 1.5-mm 2 chip area. Furthermore, the continuous class-F PA achieves 36.2 dBm output power and 52% PAE at 5.0 GHz. The PAs are also characterized using QAM signals with wide bandwidth, in order to evaluate their performance for 5G wireless applications. For a 64-QAM signal with 100-MHz bandwidth and 8 dB peak-to-average power ratio (PAPR), the continuous class-B PA achieves 29.3 dBm average output power, 28% average PAE, and −25 dB (5.5%) error vector magnitude (EVM). The continuous class-F PA, tested using a 200 MHz 256 QAM signal with 8.5 dB PAPR, provides an average output power of 28.5 dBm, average PAE of 27%, and −28 dB (4%) EVM, without any pre-distortion. INDEX TERMS 5G, broadband amplifier, continuous mode, GaN, harmonic tuned, monolithic microwave integrated circuit (MMIC), power amplifier (PA).

Unbalanced Power Amplifier: An Architecture for Broadband Back-Off Efficiency Enhancement

“…Using (24), the required turn-on power level of the auxiliary sub PA can be derived. The input-output power characteristic of the unbalanced PA can be derived using ( 4), (22), and (23).…”

“…The gain of the unbalanced PA can be derived using the models developed for the output combiner (4), input splitter (20), (21), and sub PAs ( 22), (23). Specifically, the gain at output back-off and peak power, using ( 13), ( 14), (24), and (25), can be derived as…”

A 0.8 mm2 Sub-GHz GaAs HBT Power Amplifier for 5G Application Achieving 57.5% PAE and 28.5 dBm Maximum Linear Output Power

“…The purpose of phase linearizer is to ensure linearity specification is achieved across 700 to 800 MHz which encapsulates LTE Band 12,13,14,17,20,27,28,29,44,67,68 and 85 and 5G Band which is n28. As quantified in [53], an AM-PM distortion of 5 • or more results in gain compression degradation of 1 dB or more.…”

A Fully Integrated GaN Dual-Channel Power Amplifier With Crosstalk Suppression for 5G Massive MIMO Transmitters

“…However, these process technologies suffer from low output power levels, low efficiency, and high crosstalk between channels as a result of lossy substrate. GaN monolithic microwave integrated circuit (MMIC) technology is an attractive solution for 5G systems, especially for basestation PAs [6], [7], [8], where it can provide high output power levels in a compact chip area. Furthermore, the lower losses of its SiC substrate help to reduce crosstalk in a multi-channel PA, which has been shown to have the most detrimental effect on the performance of MIMO systems [5].…”