Development of a new hybrid approach combining AFM and SEM for the nanoparticle dimensional metrology

Abstract

At this time, there is no instrument capable of measuring a nano-object along the three spatial dimensions with a controlled uncertainty. The combination of several instruments is thus necessary to metrologically characterize the dimensional properties of a nano-object. This paper proposes a new approach of hybrid metrology taking advantage of the complementary nature of atomic force microscopy (AFM) and scanning electron microscopy (SEM) techniques for measuring the main characteristic parameters of nanoparticle (NP) dimensions in 3D. The NP area equivalent, the minimal and the maximal Feret diameters are determined by SEM and the NP height is measured by AFM. In this context, a kind of new NP repositioning system consisting of a lithographed silicon substrate has been specifically developed. This device makes it possible to combine AFM and SEM size measurements performed exactly on the same set of NPs. In order to establish the proof-of-concept of this approach and assess the performance of both instruments, measurements were carried out on several samples of spherical silica NP populations ranging from 5 to 110 nm. The spherical nature of silica NPs imposes naturally the equality between their height and their lateral diameters. However, discrepancies between AFM and SEM measurements have been observed, showing significant deviation from sphericity as a function of the nanoparticle size.

Progress in Traceable Nanoscale Capacitance Measurements Using Scanning Microwave Microscopy

“…In order to carry out traceable 3D topography maps, both AFM instruments were dimensionally calibrated using a LNE-C2N surface topography standard (P900H60) with a pitch of (900.0 ± 1.0) nm and a height of (70.7 ± 0.5) nm [ 23 ]. This standard was initially calibrated directly on the LNE metrological AFM [ 24 ].…”

Deep Learning Based Instance Segmentation of Titanium Dioxide Particles in the Form of Agglomerates in Scanning Electron Microscopy

“…Finally, in this article, we did not tackle the post processing techniques in order to improve segmentation results. Several approaches exist in order to post process the optimal border location [38]. It will be developed in a future work.…”

Correlation of AFM/SEM/EDS Images to Discriminate Several Nanoparticle Populations Mixed in Cosmetics

“…To perform measurements on the same object using different equipment, a specific substrate must be used to facilitate localization. The system used is described in [2]. It consists of a silicon chip on which crosses and labels are lithographed.…”

“…A. Delvallée, 1 * M. Oulalite, 1 L. Crouzier, 1 S. Ducourtieux, 1 N. Lambeng, 1 W. Amor, 1 N. Bouzakher Ghomrasni, 1 N. Feltin, 1 A. Viot, 2 and C. Jamet 2…”