Development of a Novel Wireless Multi-Channel Stethograph System for Monitoring Cardiovascular and Cardiopulmonary Diseases

Abstract

A multi-channel stethograph system was designed and developed as an electronic auscultation system for graphic recording of heart, lung, and trachea (HLT) sounds non-invasively through a set of 16 acoustic sensors. The multi-channel stethograph system was fabricated by placing 16 microphone based acoustic sensor in a CNC machined Delrin® housing cases that are covered using diaphragms. Among the 16 acoustic sensors, 14 were positioned in a memory foam pad, and two were placed directly on the heart and trachea to acquire sounds simultaneously from the lungs, heart, and trachea. The sounds acquired from the 16 acoustic sensors were processed through a custom designed and fabricated 16-channel PCB for signal conditioning. A National Instruments (NI) 9205 data acquisition device (DAQ) along with a NI 9191 wireless chassis was used to acquire and wirelessly transmit the data from the 16-channel PCB to a Wi-Fi enabled device such as a PC/tablet. A custom LabVIEW program was developed on a Wi-Fi enabled PC/tablet to record the data from the DAQ. In addition, a MATLAB program was developed to convert the recorded data from the acoustic sensors into 16 audio files (for audio playback) and plot the waveforms in time and frequency domain as well as spectrogram for visual examination of any abnormal patterns in inhalation and exhalation. This provides critical information on the presence of crackles, rhonchi and wheeze sounds as well as abnormal heartbeat and respiration rate which helps in analyzing the condition of heart and lungs. The graphically displayed HLT sounds will help physicians in the clinical diagnosis and monitoring of lung and heart disorders, particularly chronic obstructive pulmonary disease (COPD), asthma, pneumonia, and congestive heart failure by providing objective evidence.

Recent Advances in PCG Signal Analysis using AI: A Review

“…The following study explains in Table 5 how efficient network B3 works best for PCG signal categorization in terms of evaluation metrics. Table 6 depicts the study [45,102,103] of performance…”

Development of a Multi-Channel Wearable Heart Sound Visualization System

“…In 2021, a new wireless multichannel stethoscope system was developed by Zhang et al for easier acquisition of multichannel heart sound signals and the ECG signal. This system served to monitor cardiovascular and cardiopulmonary diseases [14].…”

“…The above research has focused on acquiring multichannel signals, but precise locations of the sensors placed on the chest surface were not sufficiently considered in the mapping. Some studies used oversized sensors, resulting in low spatial resolution [12,14]. The distribution of sensors in some studies was less rational, and the signal analysis was limited.…”

Water Flow Measurement-Based Data Acquisition Using Arduino Microcontroller and PLX-DAQ Software

“…Data acquisition applications are usually controlled by software programs developed using various general-purpose programming languages such as Assembly, BASIC, C++, Fortran, Java, LabVIEW, MATLAB, PLX-DAQ, etc. [19][21]- [26]. The use of LabVIEW, which is connected to Arduino, does not need to be programmed again, so it can directly command and obtain data as well as MATLAB [9] [27].…”

“…There are various types of sensors used for measuring the liquid level from the previous paper [28], such as the optical type [10][30], radar type [31][32], float type [33][34], ultrasonic type [28][35]- [38], acoustic sensors [26], Temperature [39], etc. This type of ultrasonic sensor is an instrument with a small size, durable, contactless measurement, reliable, and cost-effective for distance measurement applications with simple use.…”