Development of Differential Equations and their Solution Using the Simulink Matlab Program, which Calculate the Self-Swinging of Synchronous Machines with Traditional and Longitudinal-Transverse Excitation

Abstract

The article presents the differential equations of a synchronous generator in phase coordinates and in the coordinate system (d, q). In addition, differential equations of synchronous machines with longitudinal-transverse excitation and a block diagram based on these equations are given. The system of differential equations is solved by the operator method. On the basis of a system of differential equations using the Simulink Matlab program, a structural diagram was created and a graph of the self-swinging processes taking place in synchronous machines with conventional and longitudinal-transverse excitation was obtained. On the basis of the obtained graph, the processes of self-swinging of synchronous generators with traditional and longitudinal and transverse excitation are compared.

Loading mode of a ferromagnetic current stabilizer

“…This dependence qualitatively describes the characteristic of simultaneous magnetization in the working section of the magnetic amplifier in the stabilization mode and gives rather simple results for analyzing the load mode of the device. The value of the coefficient depends on the magnitude of the bias current, and it can be determined by the method of selected points or by the method of least squares [15][16][17][18][19][20][21][22].…”

Features of autonomous and parallel operation of an asynchronous generator with a network of endless power in the current stage of EPS development

“…The required battery capacity C must exceed a certain critical value C0, which depends on the parameters of an autonomous asynchronous generator: only in this case, the generator self-excites and a three-phase symmetric voltage system is installed on the stator windings. The voltage value ultimately depends on the characteristics of the machine and the capacitance of the capacitors [13][14][15][16][17][18].…”

Energy saving in industry

“…In particular, the mode of operation in time; continuous mode of continuous operation; variable mode; product characteristics (single, homogeneous, heterogeneous); characteristics w operating mode of the main components of the technological process (compressed air, water, oxygen, etc. ); inter production links; a set of measures for energy saving [14][15][16][17][18][19][20].…”