Dispersion and Exposure to a Cough-Generated Aerosol in a Simulated Medical Examination Room

Abstract

Few studies have quantified the dispersion of potentially infectious bioaerosols produced by patients in the health care environment and the exposure of health care workers to these particles. Controlled studies are needed to assess the spread of bioaerosols and the efficacy of different types of respiratory personal protective equipment (PPE) in preventing airborne disease transmission. An environmental chamber was equipped to simulate a patient coughing aerosol particles into a medical examination room, and a health care worker breathing while exposed to these particles. The system has three main parts: (1) a coughing simulator that expels an aerosol-laden cough through a head form; (2) a breathing simulator with a second head form that can be fitted with respiratory PPE; and (3) aerosol particle counters to measure concentrations inside and outside the PPE and at locations throughout the room. Dispersion of aerosol particles with optical diameters from 0.3 to 7.5 μm was evaluated along with the influence of breathing rate, room ventilation, and the locations of the coughing and breathing simulators. Penetration of cough aerosol particles through nine models of surgical masks and respirators placed on the breathing simulator was measured at 32 and 85 L/min flow rates and compared with the results from a standard filter tester. Results show that cough-generated aerosol particles spread rapidly throughout the room, and that within 5 min, a worker anywhere in the room would be exposed to potentially hazardous aerosols. Aerosol exposure is highest with no personal protective equipment, followed by surgical masks, and the least exposure is seen with N95 FFRs. These differences are seen regardless of breathing rate and relative position of the coughing and breathing simulators. These results provide a better understanding of the exposure of workers to cough aerosols from patients and of the relative efficacy of different types of respiratory PPE, and they will assist investigators in providing research-based recommendations for effective respiratory protection strategies in health care settings.

Transmissibility of the Monkeypox Virus Clades via Respiratory Transmission: Investigation Using the Prairie Dog-Monkeypox Virus Challenge System

“…The described prairie dog MPXV animal model will be useful to study anti-virals or therapeutics that may stop/decrease transmission of the virus. However, to truly understand the transmissibility potential of the two MPXV clades, studies that evaluate aerosol/particle numbers and size will be of benefit [18]. Such controlled studies that are able to generate different particle sizes as well as different transmission scenarios (i.e.…”

The impact of the air distribution method in ventilated rooms on the aerosol particle dispersion and removal: The experimental approach

“…Higher concentration of contaminants in the case of displacement ventilation was also registered by Olmedo et al [4]. Lindsley et al presented a laboratory study simulating a patient's coughing represented by aerosol particles (optical diameters from 0.3 to 7.5 m) analysed together with the breathing rate, room ventilation, and the locations of the coughing and breathing simulators [5]. Cough aerosols were initially carried in a plume capable of http://dx.doi.org/10.1016/j.enbuild.2014.…”

Viable influenza A virus in airborne particles expelled during coughs versus exhalations

“…This is an important question, because the airflow dynamics of coughs and exhalations are very different. Coughing produces a high‐velocity jet that can propel a plume of aerosol particles long distances, which disperses the airborne particles widely 26. Exhalations have much lower velocities and are likely to produce higher particle concentrations in the immediate vicinity of a patient and lower concentrations further away.…”