Economic Optimization of the Energy Supply for a Logistics Center Considering Variable-Rate Energy Tariffs and Integration of Photovoltaics

Abstract

The energy supplied by photovoltaic (PV) panels connected to the grid creates more flexibility for energy management; however, oversizing the PV system may result in an energy surplus, an essential factor to be considered during energy efficiency optimization. The economic analysis of energy supply systems for buildings and industry should include a detailed feasibility analysis and a life cycle perspective. Simulations were performed to quantify the potential savings when the excess of PV energy (surplus) is supposed to be exported to the grid by considering the net metering and net billing approaches. Our objective was to evaluate the electrical demand of a logistics center with pre-design modeling and simulation, and determine the adequate system configurations by considering the life cycle costing (LCC). We established a baseline and three alternative economic scenarios for optimization. Combining the use of TRNSYS 180 Simulation Studio and its optimization library component, GenOp (Generic Optimization Program), we simulated different options of grid energy contracts considering the variable tariffs and the integration with PVs. Based on the LCC, a single-objective optimization (SOO) process was performed. This approach allowed us to envisage possible configurations, reducing up to a quarter of annual grid energy consumption that represents savings of around 21% for the LCC in a timeframe of 20 years, reaching up to 39% when the export of the PV surplus energy is considered. The payback period of investments is below six years for the optimal scenarios.

Measurement and Modeling of 3D Solar Irradiance for Vehicle-Integrated Photovoltaic

“…As a result of increasing concerns of greenhouse gas emissions in the transportation sectors, the fuel and engine of the car are required to consider the total emission of CO 2 on a well-to-wheel basis. The typical approach is an electric vehicle (EV) [47] charged by the electricity generated by renewable energy like solar power [48]. The primary energy should be renewable energy; otherwise, a significant reduction of the greenhouse gas emission will not be expected [49].…”

Optimization of a 660 MWe Supercritical Power Plant Performance—A Case of Industry 4.0 in the Data-Driven Operational Management Part 1. Thermal Efficiency

“…The energy conversion efficiency, fuel consumption, and hazardous emissions from thermal power plants on the environment are critical issues of concern in research in industrial and regulatory circles in the last decade [5][6][7][8]. Various retrofits, technology improvements, and state-of-the-art air pollution control devices are integrated at the power complexes to ensure cleaner energy production with minimal emissions from the power plants that comply with various national and international standards [9][10][11][12][13][14][15][16][17][18][19][20][21][22][23][24][25].…”

Optimization of a 660 MWe Supercritical Power Plant Performance—A Case of Industry 4.0 in the Data-Driven Operational Management. Part 2. Power Generation

“…Over the past few decades, researchers and energy experts are closely collaborating in a wide range of research activities to mitigate the harmful impacts of power generation to ensure sustainable power generation and environmental protection. [2][3][4][5][6][7][8][9][10][11][12][13][14][15][16].…”