Effect of Bass Bar Tension on Modal Parameters of a Violin's Top Plate

Abstract

Experimental modal analysis of a violin with three different tensions of a bass bar has been performed. The bass bar tension is the only intentionally introduced modification of the instrument. The aim of the study was to find differences and similarities between top plate modal parameters determined by a bass bar perfectly fitting the shape of the top plate, the bass bar with a tension usually applied by luthiers (normal), and the tension higher than the normal value. In the modal analysis four signature modes are taken into account. Bass bar tension does not change the sequence of mode shapes. Changes in modal damping are insignificant. An increase in bass bar tension causes an increase in modal frequencies A0 and B(1+) and does not change the frequencies of modes CBR and B(1−).

Modal Analysis of a Trapezoidal Violin Built After the Description of Félix Savart

“…4, the values of modal damping are not zero. Thus, complex modes describe the actual vibrational behaviour, similarly to guitars (Skrodzka et al, 2011) and violins (Skrodzka et al, 2009(Skrodzka et al, , 2013(Skrodzka et al, , 2014.…”

Differences in violin sounds caused by changes on arching profiles

“…The influence of the arching profile, in particular, poses a challenging subject for study, with limited objective data available on its impact on sound. In contrast to experimental investigations into components such as the bassbar [4], soundpost [5], or plate thickness [6], the arching profile cannot be easily modified once the instrument is completed. Furthermore, the use of wood in traditional violins prevents the creation of identical instruments with only the arching profile changed, even if pieces extracted from the same wooden blanks are employed, as seen in [7].…”