Effect of Irreversibilities on the Performance of Thermoelectric Generator Investigated Using Exergy Analysis

Abstract

For a practical thermoelectric generator (TEG) system, the performance is affected by many irreversible processes. This study evaluates the effects of multi-irreversibilities on TEG performance using exergy analysis. Based on the exergy analysis, two performance indexes, the energy efficiency and exergy efficiency, are used. A finite element scheme is employed to model the TEG system. The heat loss from the TEG to the environment and temperature-dependent material properties are considered. The results suggest that when the application of the small electrical current is considered, decreasing the hot-reservoir temperature or increasing the cold-reservoir temperature can improve the TEG exergy efficiency. Although heat loss slightly decreases the maximum energy and exergy efficiency, it can improve energy and exergy efficiencies for a case with large electrical current. On the other hand, when the Seebeck coefficient or thermal conductivity is temperature-dependent, both the maximum energy efficiency and exergy efficiency increase with increasing hot-reservoir temperature. However, the temperature-dependence of the electrical resistivity reduces the maximum exergy efficiency when the hot-reservoir temperature increases even though the maximum energy efficiency is increased.

Performance evaluation of thermoelectric generator employing SEPIC converter and incremental conductance maximum power point tracking for electric vehicles

“…Solar, wind, thermal, water flow, ocean energy, and fuel cells are all examples of renewable energy. There is almost 75% wastage in transport [1]- [3] and industry. Thus, waste heat recovery can contribute a significant quantity of energy to everyday needs, especially transportation.…”

Multi-objective thermal analysis of a thermoelectric device: Influence of geometric features on device characteristics

“…Exergy analysis and performance assessment of thermoelectric generator were carried out by Wang et al [5]. Their findings revealed that both the maximum energy efficiency and exergy efficiency increased with increasing hot-reservoir temperature for the case where the Seebeck coefficient and thermal conductivity was temperature-dependent.…”