Effect of reinforcement with carbon fabrics impregnated with nanoparticles on the tensile behavior of cement-based composites

Dvorkin, Dmitry V.; Peled, Alva

doi:10.1016/j.cemconres.2016.03.008

Cited by 59 publications

(27 citation statements)

References 16 publications

Supporting

Mentioning

Contrasting

Unclassified

Order By: Relevance

“…Another aspect that influences the efficiency of shear force transfer from yarn to matrix is the relative displacement of the single filaments under load. With styrene-butadiene impregnation, the outer filaments of the yarns show a direct interaction with the surrounding matrix, while the inner filaments tend to slip against the outer sleeve filaments [ 38 , 39 ].…”

Section: Resultsmentioning

confidence: 99%

Tensile Behavior of High-Strength, Strain-Hardening Cement-Based Composites (HS-SHCC) Reinforced with Continuous Textile Made of Ultra-High-Molecular-Weight Polyethylene

et al. 2020

View full text Add to dashboard Cite

The paper at hand presents an investigation of the tensile behavior of high-strength, strain-hardening cement-based composites (HS-SHCC), reinforced with a single layer of continuous, two-dimensional textile made of ultra-high molecular weight polyethylene (UHMWPE). Uniaxial tension tests were performed on the bare UHMWPE textiles, on plain HS-SHCC, and on the hybrid fiber-reinforced composites. The bond properties between the textile yarns and the surrounding composite were investigated in single-yarn pullout experiments. In order to assess the influence of bond strength between the yarn and HS-SHCC on the tensile behavior of the composites with hybrid fiber reinforcement, the textile samples were analyzed both with, and without, an additional coating of epoxy resin and sand. Compared to the composites reinforced with carbon yarns in previous studies by the authors, the high elongation capacity of the UHMWPE textile established the higher strain capacity of the hybrid fiber-reinforced composites, and showed superior energy absorption capacity up to failure. The UHMWPE textile limited the average crack width in comparison with that of plain HS-SHCC, but led to slightly larger crack widths when compared to equivalent composites reinforced with carbon textile, the reason for which was traced back to the lower Young’s modulus and the higher elongation capacity of the polymer textile.

show abstract

Section: Resultsmentioning

confidence: 99%

Tensile Behavior of High-Strength, Strain-Hardening Cement-Based Composites (HS-SHCC) Reinforced with Continuous Textile Made of Ultra-High-Molecular-Weight Polyethylene

et al. 2020

View full text Add to dashboard Cite

show abstract

“…The matrix-fiber interfacial bond directly affects the mechanical performance of TRC, since it resists crack opening and crack propagation. Many studies have been investigated to improve the bonding strength of fiber yarns to matrix, such as impregnation epoxy [ 9 , 10 ], coatings with quartz sand [ 9 , 11 ], impregnation with nanoparticles [ 12 ], adding short fibers [ 10 , 11 , 13 , 14 , 15 , 16 , 17 , 18 , 19 ], surface treatment [ 20 , 21 ], and pre-tension [ 16 , 17 , 19 ].…”

Section: Introductionmentioning

confidence: 99%

Investigation on Flexural Behavior of Geopolymer-Based Carbon Textile/Basalt Fiber Hybrid Composite

Louda

Buczkowska

et al. 2021

Polymers

View full text Add to dashboard Cite

This paper presents an experimental research on the mechanical properties of the hybrid composite thin-plates of the short basalt fibers (CBFs)/carbon textile-reinforced geomortar. The effect of fiber contents and lengths of CBFs on the flexural behavior of carbon textile-reinforced geopolymer specimens (TRGs) was investigated by the four-point flexural strength and Charpy impact test. The experimental results of hybrid TRGs, on the one hand, were compared with reference TRGs, without CBF addition; on the other hand, they were compared with the results of our previous publication. According to the mixing manner applied, fresh geomortar indicated a marked reduction in workability, increasing the CBF loading. Furthermore, using CBFs with lengths of 12 mm and 24 mm makes it easy to form the fiber clusters in geomortar during mixing. According to all the CBF loadings used, it was found that TRGs showed a significant improvement in both static and dynamic flexural strength. However, the failure mode of these TRGs is similar to that of the reference TRGs, described by the process of fiber debonding or simultaneously fiber debonding and collapse. In comparison with our prior work results, neither the CBF dose levels nor the fiber lengths used in this work have yielded a positive effect on the failure manner of TRGs. According to the results of the Charpy impact test, this reveals that the anchoring capacity of textile layers in geomortar plays an important role in specimens’ strength.

show abstract

“…The degree of concrete penetration through the yarns is perfectly controlling the bond efficiency while the external filaments which are in contact with the matrix play a vital role in TRCs manufacturing [5]. The bond efficiency can be improved by some casting techniques such as pultrusion process [6][7][8].…”

Section: Introductionmentioning

confidence: 99%

Improving Flexural Behavior of Textile Reinforced Concrete One Way Slab by Removing Weft Yarns with Different Percentages

2018

View full text Add to dashboard Cite

Textile reinforced concrete that developed at recent years is composed of the continuous textile fabric incorporated into the cementitious matrix. The geometry of the textile reinforcements has a great influence on the TRC overall behavior since it affects the bond efficiency perfectly. The effect of weft yarns removing on the flexural behavior of (1500 × 500 × 50) mm one way slabs was investigated, eight layers of the carbon fabric were used with (50%, 67% and 75%) removing of weft yarns in addition to one specimen without removing. The four one- way slabs were casted by hand lay-up method, cured for (28) days and tested in flexure using four points method. The bending capacity and the bond efficiency factor were calculated according to the conditions of the equilibrium models by comparing with experimental results. The results revealed that with higher removing proportion there was a perfect improvement in the flexural capacity, higher first crack load, eminent post cracking stiffness, higher average concrete strain and lower ultimate mid span deflection and higher toughness and ductility. Furthermore, the results clarified that there is an optimum percent of weft yarns removing at which the damage occurrence around the weft yarns is significantly reduced, and this negative effect constriction overcome the positive anchoring effect.

show abstract

Effect of reinforcement with carbon fabrics impregnated with nanoparticles on the tensile behavior of cement-based composites

Cited by 59 publications

References 16 publications

Tensile Behavior of High-Strength, Strain-Hardening Cement-Based Composites (HS-SHCC) Reinforced with Continuous Textile Made of Ultra-High-Molecular-Weight Polyethylene

Tensile Behavior of High-Strength, Strain-Hardening Cement-Based Composites (HS-SHCC) Reinforced with Continuous Textile Made of Ultra-High-Molecular-Weight Polyethylene

Investigation on Flexural Behavior of Geopolymer-Based Carbon Textile/Basalt Fiber Hybrid Composite

Improving Flexural Behavior of Textile Reinforced Concrete One Way Slab by Removing Weft Yarns with Different Percentages

Contact Info

Product

Resources

About