Effect of Welding Heat Input on Simulated HAZ Areas in S960QL High Strength Steel

Abstract

When the weldability of high strength steels is analyzed, it is the softening in the heat-affected zone (HAZ) that is mostly investigated, and the reduction of toughness properties is generally less considered. The outstanding toughness properties of quenched and tempered high strength steels cannot be adequately preserved during the welding due to the unfavorable microstructural changes in the HAZ. Relevant technological variants (t8/5 = 2.5–100 s) for arc welding technologies were applied during the HAZ simulation of S960QL steel (EN 10025-6) in a Gleeble 3500 physical simulator, and the effect of cooling time on the critical HAZ areas of single and multipass welded joints was analyzed. Thermal cycles were determined according to the Rykalin 3D model. The properties of the selected coarse-grained (CGHAZ), intercritical (ICHAZ) and intercritically reheated coarse-grained (ICCGHAZ) zones were investigated by scanning electron microscope, macro and micro hardness tests and instrumented Charpy V-notch pendulum impact tests. The examined HAZ subzones indicated higher sensitivity to the welding heat input compared to conventional structural steels. Due to the observed brittle behavior of all subzones in the whole t8/5 range, the possible lowest welding heat input should be applied in order to minimize the volume of HAZ that does not put fulfillment of the allowed maximal (450 HV10) hardness at risk and does not lead to the formation of cold cracks.

Effect of the t8/5 Cooling Time on the Properties of S960MC Steel in the HAZ of Welded Joints Evaluated by Thermal Physical Simulation

“…Laitila and Larkiola [3] used physical simulation to evaluate the properties of S960 steel with multi-layer MAG welding. Gáspár [23] and Dunđer et al [24] evaluated the effect of the cooling time t 8/5 on the hardness and toughness of the S960QL steel HAZ.…”

Applied Research of Applicability of High-Strength Steel for a Track of a Demining Machine in Term of Its Tribological Properties

“…The application research can be developed only if the basic research has a sufficient progress. There was a problem: the area of the high-strength steels is generally worked out well, however, there is a gap for optimizing the lifespan of the welded high-strength structures [25][26][27][28][29]. Safety is the primary condition for every structure.…”

Lángegyengetés hőciklusai

“…egyértelműen hatással lehetnek, meghatározhatják az alakított, egyengetett szerkezet lokális mechanikai tulajdonságait. A felvett hőciklusok alapján a Miskolci Egyetemen rendelkezésre álló Glebble hőszimulációs berendezés segítségével a jövőben a lángegyengetés hatásának vizsgálata céljából (hasonlóan az ívhegesztésekre jellemző hőhatásövezet vizsgálatához) a technológia nagyobb próbatesten való programozott szimulációját, ill. annak vizsgálatát céloztuk meg [8].…”