Embedding components in voltage converter PCB for size reduction and heat management

Abstract

Purpose – The purpose of this paper was to show physical limitation of embedding standard packaging components into printed circuit board (PCB) which is more reasonable technology for small series productions which is popular in industrial products. Embedding electronic components inside a PCB FR-4 substrate leads to significant size reduction and better heat management. Embedded chip technology is already known in many consumer electronics applications, but it is focused on high volumes and required to order components ready to be embedded. Design/methodology/approach – Highly integrated DC/DC converter with standard-package electronic parts (passive and active) was embedded inside a PCB structure. The design and the manufacturing process was based on standard PCB FR-4 technology. Sandwich solution was used to integrate all layers together; one of the main investigations was to focus on how to fill space around components to keep internal stresses on very low level. Findings – There were few considerations during choosing the right concept. The first, which occurred during the first producing round, was the distance between thick copper and inner layer. The second one was the way how to fill space between mounted components on inner layer and isolation laminate. A few trials took place and it is decided that it is impossible to fill this space with resin from prepregs; therefore, a casting compound was used. Originality/value – Design and manufacturing process which brings 37 per cent of size reduction of complete DC/DC voltage converter PCB with 28.5 W output power comparing to a reference design with standard surface mounted devices (SMD) and copper layout implementation has been achieved during research project.

Technology of Standard SMT Components Embedded Into PCB by Using Different Materials as Filling Masses

“…Due to the limited distance between the layers, these SMD components must have a reduced height. [1][2][3][4][5] The technique of mounting components in the laminate with the use of special filling masses also allows for the development of this technology for embedded components.…”

High thermally conductive epoxy composite inks cured by infrared laser irradiation for two-dimensional/three-dimensional printing technology

“…Therefore, it is required to use heat dissipation materials for electronic devices. [1][2][3] Epoxy resins are used in various industrial fields such as glue, adhesive, coating material, support material and encapsulation due to its strong chemical and physical resistance, tensile strength, mechanical strength, ease of processing, insulation and low volume shrinkage during curing. However, pure epoxy resin has a very low thermal conductivity (0.2 W/mÁK), which limits its use as a heat-dissipating material.…”

Graphene nanoplatelet‐silica hybrid epoxy composites as electrical insulation with enhanced thermal conductivity

“…The effective distribution of energy to factories and houses is crucial for everyday activity. Heat generated during the operation of the power products can lead to the malfunctioning or even to the damage of the equipment especially when the size of the device is reduced . One of the most important devices used for processing and distribution of power is a transformer, the power of which can reach even 100 MW.…”