Emulsion Stabilization with Functionalized Cellulose Nanoparticles Fabricated Using Deep Eutectic Solvents

Abstract

In this experiment, the influence of the morphology and surface characteristics of cellulosic nanoparticles (i.e., cellulose nanocrystals [CNCs] and cellulose nanofibers [CNFs]) on oil-in-water (o/w) emulsion stabilization was studied using non-modified or functionalized nanoparticles obtained following deep eutectic solvent (DES) pre-treatments. The effect of the oil-to-water ratio (5, 10, and 20 wt.-% (weight percent) of oil), the type of nanoparticle, and the concentration of the particles (0.05–0.2 wt.-%) on the oil-droplet size (using laser diffractometry), o/w emulsion stability (via analytical centrifugation), and stabilization mechanisms (using field emission scanning electron microscopy with the model compound—i.e., polymerized styrene in water emulsions) were examined. All the cellulosic nanoparticles studied decreased the oil droplet size in emulsion (sizes varied from 22.5 µm to 8.9 µm, depending on the nanoparticle used). Efficient o/w emulsion stabilization against coalescence and an oil droplet-stabilizing web-like structure were obtained only, however, with surface-functionalized CNFs, which had a moderate hydrophilicity level. CNFs without surface functionalization did not prevent either the coalescence or the creaming of emulsions, probably due to the natural hydrophobicity of the nanoparticles and their instability in water. Moderately hydrophilic CNCs, on the other hand, distributed evenly and displayed good interaction with both dispersion phases. The rigid structure of CNCs meant, however, that voluminous web structures were not formed on the surface of oil droplets; they formed in flat, uniform layers instead. Consequently, emulsion stability was lower with CNCs, when compared with surface-functionalized CNFs. Tunable cellulose nanoparticles can be used in several applications such as in enhanced marine oil response.

Use of Deep Eutectic Solvents in Polymer Chemistry–A Review

“…In the last five years several research teams have published data focused on the purposeful pretreatment, modification, and dissolution of cellulose from the following sources: cotton linter pulp [98,99,100,101]; microcrystalline cellulose [100,101]; hardwood or softwood pulp [102,103,104,105,106,107,108,109,110,111,112]; Loblolly pine particles [113]; cellulose methyl carbamate [114]; recycled boxboard, milk containerboard, fluting board [103,109,115]. Cellulose nanocrystals or cellulose whiskers, and cellulose nanofibrils are species, which one dimension must be less than 100 nm.…”

Enhancing packaging board properties using micro- and nanofibers prepared from recycled board

“…Thus, numerous different chemical pretreatments have been used to loosen the rigid structure of cellulose. Deep eutectic solvents (DESs) belong to the most promising group of novel green chemicals to enable efficient CNF production (Selkälä et al 2016;Li et al 2017Li et al , 2018Sirviö 2018;Ojala et al 2018). DESs can be derived from biodegradable and readily available green compounds that have a low toxicity (Sirviö et al 2015).…”

Bacterial nano cellulose as non-active pharmaceutical ingredient. Advances and perspectives

“…BNC are highly promising platforms for the synthesis of biocompatible nanocarriers of small molecule and macromolecular drugs for biomedical applications. 49 The various processing procedures for BNC have already been fully optimized for many years, and good strategies that possibly focus on a more significant scale are being established. 50 Around the globe, research groups and, increasingly, companies are extensively working to expand the market for nanocellulose products and to open up totally new application areas.…”