Envelope Thermal Design Optimization for Urban Residential Buildings in Malawi

Abstract

This study sought to optimize the envelope thermal design of free-running urban residential buildings in Malawi. It specifically set out to improve the urban residential buildings' thermal comfort and suggest optimal envelope thermal design features for these buildings. The research study was primarily dependent on computer simulations in EnergyPlus to replicate the typical Malawian urban residential building's thermal behaviour and then study the impacts of various envelope configurations on the thermal comfort conditions registered in the building. The simulation model was experimentally validated to check its appropriateness to the climatic design conditions prevalent in Malawi and out of the three major cities that were considered, the model was found to be appropriate for use in the two cities of Mzuzu and Lilongwe leaving out the city of Blantyre. The optimization methodology that was employed involved the use of orthogonal arrays, statistical analyses and the listing method. It was found that the optimal envelope thermal design, which registered up to 18% lower discomfort hours than that of the typical urban residential building, consists of a 50 mm concrete floor slab, 230 mm burnt brick walls with an external layer of 19 mm EPS, tiled roof with an internal layer of sarking and 50 mm EPS, double Low-E Glazing with a transparency ratio of 45% and 0.2408 m 2 of adaptable operational surface area for the air bricks. Out of all the envelope features that were studied, air infiltration registered the most significant contribution towards the ultimate residential building thermal performance. It was demonstrated that controlled air infiltration through the use of operable air bricks whose operational surface area is adaptable can be very effective in enhancing the building's comfort levels. It was further observed that excessive insulation of the building envelope generally has a detrimental effect on the indoor space thermal comfort levels.

Energy and Environmental Analysis of Single-Family Houses Located in Poland

“…Over the past few years, many important studies have investigated the energy efficiency of a building, in particular paying attention to indoor thermal comfort [24,[36][37][38][39][40][41][42][43][44][45][46][47][48][49][50]. Many researchers have conducted simulations that were coupled with optimization methods.…”

Impacto da absortância e transmitância das fachadas na eficiência energética e conforto térmico para habitação de interesse social

“…Vários motivos podem ser apresentados para explicar este status quo. Kalua (2016) também aponta alguns, como a baixa vontade política para modernizar radicalmente as legislações urbanas e construtivas em muitos países pouco industrializados. A maioria desses países ainda depende de padrões que antecedem o corpo atual de conhecimento sobre a construção e seu desempenho térmico.…”

A Multi-Parametric Mathematical Approach on the Selection of Optimum Insulation Thicknesses in Buildings

“…We apply design of experiments [24], factorial simulation and analysis of variance (ANOVA), as it was similarly applied for envelope optimization in Malawi [25].…”