There is a critical need within the pipeline gas industry for an inexpensive and reliable
technology to generate an identification tag or tracer that can be added to pipeline gas to identify
gas that may escape and improve the deliverability and management of gas in underground
storage fields. Ethylene is an ideal tracer, because it does not exist naturally in the pipeline gas,
and because its physical properties are similar to the pipeline gas components. A pyrolysis process,
known as the Tragen process, has been developed to continuously convert the ∼2%−4% ethane
component present in pipeline gas into ethylene at common pipeline pressures of 800 psi. In our
studies of the Tragen process, pyrolysis without steam addition achieved a maximum ethylene
yield of 28%−35% at a temperature range of 700−775 °C, corresponding to an ethylene
concentration of 4600−5800 ppm in the product gas. Coke deposition was determined to occur at
a significant rate in the pyrolysis reactor without steam addition. The δ 13C isotopic analysis of
gas components showed a δ 13C value of ethylene similar to ethane in the pipeline gas, indicating
that most of the ethylene was generated from decomposition of the ethane in the raw gas. However,
δ 13C isotopic analysis of the deposited coke showed that coke was primarily produced from
methane, rather than from ethane or other heavier hydrocarbons. No coke deposition was observed
with the addition of steam at concentrations of >20% (by volume). The dilution with steam also
improved the ethylene yield.