Large scale windthrow salvage logging is increasing in Central Europe because of the growth of severe atmospheric events due to global heating. Sustainable forest operations in these conditions are challenging in terms of both productivity performances and safety of the operations. Fully mechanized harvesting systems are the preferred solution on trafficable terrains and proper slopes. However, different work methods and logistic organization of the operations could largely change the overall performances. The study observed three harvesting sites based on fully mechanized cut-to-length systems and located in areas affected by the Vaia storm, which hit north-eastern Italy in October 2018. The objectives were to estimate forwarder productivity in salvage logging in difficult terrain and to identify significant variables affecting this productivity under real working conditions. Time and motion studies were carried out and covered 59.9 PMH 15 , for a total of 101 working cycles, extracting a total volume of 1277 m 3 of timber. Average time consumption for each site was 38.7, 42.2, and 25.1 PMH 15 with average productivity of 22.5, 18.5, and 29.4 m 3 /PMH 15 , respectively, for Sites A, B, and C. A total of seven explanatory variables significantly affected forwarder productivity. Average load volume, maximum machine inclination during loading, and number of logs positively affected the productivity. On the contrary, travel distance, load volume, maximum ground slope during moving and loading have a negative influence. With an average travel distance of 500 m, the productivity resulted 20.52, 16.31, and 23.03 m 3 /PMH 15 , respectively, for Sites A, B, and C. An increase of 200 m of travel distance causes a decrease in productivity of 6%.Forests 2020, 11, 341 2 of 14 or on (ii) passive management [6]. Active intervention strategies focus on rapid post-disturbance harvest and recovery of the economic value of the forest [7] in order to decrease the risk of a rapid reduction of the timber value due to reductions in wood quality [8], the risk of wildfires [9], and insect outbreaks [10].A common post-disturbance management approach is salvage logging [11,12] which consists of the widespread removal of damaged trees. Salvage logging benefits and drawbacks are widely discussed as it can have a negative effect on forests in terms of reducing biodiversity, increasing erosion, and reducing soil fertility [11]. Some authors report that salvage logging interventions must be planned considering the site-specific characteristics [13,14]. When salvage logging is appropriate to be applied, the most suitable technological solutions are those based on fully mechanized systems as these guarantee high productivity and above all a lower risk for operators as they work exclusively on the machines [15,16].In complex terrain and in mountain areas, with a low density of forest roads, the use of fully mechanized systems in salvage logging operations is difficult. In these conditions, the main system remains the semi-mechanized system based ...