Exploitation of multiple incidences spectrometric measurements for thin film reverse engineering

Abstract

In the present paper we determine the optical constants and thicknesses of multilayer thin film stacks, in the visible and near infrared ranges. These parameters are derived from the transmittance and reflectance spectra measured by a spectrophotometer, for several angles of incidence. Several examples are studied, from a simple single layer structure up to a 22-layer dielectric filter. We show that the use of a large number of incidence angles is an effective means of reducing the number of mathematical solutions and converging on the correct physical solution when the number of layers increases. More specifically, we provide an in-depth discussion of the approach used to extract the index and thickness of each layer, which is achieved by analysing the various mathematical solutions given by a global optimization procedure, based on as little as 6 and as many as 32 variable parameters. The results show that multiple incidences, lead to the true solution for a filter with a large number of layers. In the present study, a Clustering Global Optimization algorithm is used, and is shown to be efficient even for a high number of variable parameters. Our analysis allows the accuracy of the reverse engineering process to be estimated at approximately 1 nm for the thickness, and 2 10(-3) for the index of each layer in a 22-layer filter.

Surface roughness effects on aluminium-based ultraviolet plasmonic nanolasers

“…A perfectly matched layer (PML) surrounding the structural model is used to simulate the large substrate and space with respect to the size of the cavity. The simulation also incorporated the refractive indices of ZnO26 and SiO 2 27 along with their dispersive properties, and the refractive index of air is 1.…”

Refractive index determination of SiO2 layer in the UV/Vis/NIR range: spectrophotometric reverse engineering on single and bi-layer designs

“…The other technique based on spectrophotometric analysis is the curve fitting method, which requires an optical dispersion model. This model is able to integrate a considerably greater quantity of spectral information, such as transmittance and reflectance, or spectra at multiple oblique incidences, into the index determination process [8]. In addition, it is also able to manage complicated cases, such as strongly absorbing and complex multilayer filters.…”

A study on Si/Al2O3 paramagnetic point defects

“…71 For wavelengths below 400 nm, the extinction coefficient increases slowly. 71 Thus, the additional thermal SiO 2 between Al 2 O 3 and Si might protect the Si surface against high energetic particles originating from the oxygen plasma but high energetic photons might penetrate through this SiO 2 layer. Hence, the additional SiO 2 layer might reduce mechanical damages on the Si surface but not surface damages induced by high energetic photons.…”