Fabrication and characterization of green light emitting diode

SIAHJANI, Shirin; White, Matthew S.; Sariçiftçi, Niyazi Serdar; ERTEN-ELA, Sule

doi:10.3906/fiz-1405-9

Cited by 2 publications

(1 citation statement)

References 17 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…In this interval voltage, the A and B motors showed similar results presenting below 4000 rpm, as reported by literature [25][26][27] . The Q motor presented higher values of speed in the same interval of different voltages and for this motive, it was abandoned.…”

Section: Resultssupporting

confidence: 88%

Low cost spinner developed for deposition of thin films used in OLED devices

Santos

Takahashi²,

Takimoto³

et al. 2018

RBAV

View full text Add to dashboard Cite

This work aims the development of a compact spinner to be used inside the glove-box chamber to deposition of polymeric thin films used in the build of OLED devices. Initially, ten fans extracted of microcomputers were tested with commercial multi-voltage power supply. Four fans were selected based on the standard deviation of speed. A variable power supply was also built in order to get a more detailed response in terms of electrical current and speed in function of applied voltage. The fan that showed less variation of speed with applied voltage was selected for deposition tests using polymeric photoresist solution on the ITO (indium tin oxide) coated glass. This polymer was deposited by spin-coating at different speeds: 1000, 2000, 3000 and 4000 rpm and dried for the thicknesses measurement revealing good uniformity. Finally, three OLED devices were assembled with 2000 and 3000 rpm and the layers were dried under the same conditions. In the structure of the devices were used the materials deposited layer-by-layer: glass/ITO/PEDOT: PSS/Polyfluorene (PFpf)/Al. The OLED devices revealed blue light electroluminescence. The I-V curves showed better performance for OLED devices mounted at 2000 rpm with higher current density and similar appearance to the diode curve.

show abstract

Section: Resultssupporting

confidence: 88%