Fabrication of Al/AlOx/Al junctions with high uniformity and stability on sapphire substrates

Abstract

Tantalum and aluminum on sapphire are widely used platforms for qubits of long coherent time. As quantum chips scale up, the number of Josephson junctions on Sapphire increases. Thus, both the uniformity and stability of the junctions are crucial to quantum devices, such as scalable superconducting quantum computer circuit, and quantum-limited amplifiers. By optimizing the fabrication process, especially, the conductive layer during the electron beam lithography process, Al/AlOx/Al junctions of sizes ranging from 0.0169 to 0.04 µm2 on sapphire substrates were prepared. The relative standard deviation of room temperature resistances (RN) of these junctions is better than 1.7% on 15 mm×15 mm chips, and better than 2.66% on 2 inch wafers, which is the highest uniformity on sapphire substrates has been reported. The junctions are robust and stable in resistances as temperature changes. The resistances increase by the ratio of 9.73% relative to RN as the temperature ramp down to 4K, and restore their initial values in the reverse process as the temperature ramps back to RT. After being stored in a nitrogen cabinet for 100 days, the resistance of the junctions changed by1.16% in average. The demonstration of uniform and stable Josephson junctions in large area paves the way for the fabrication of superconducting chip of hundreds of qubits on sapphire substrates.