Fabrication of Large-area Free-standing Ultrathin Polymer Films

Abstract

This procedure describes a method for the fabrication of large-area and ultrathin free-standing polymer films. Typically, ultrathin films are prepared using either sacrificial layers, which may damage the film or affect its mechanical properties, or they are made on freshly cleaved mica, a substrate that is difficult to scale. Further, the size of ultrathin film is typically limited to a few square millimeters. In this method, we modify a surface with a polyelectrolyte that alters the strength of adhesion between polymer and deposition substrate. The polyelectrolyte can be shown to remain on the wafer using spectroscopy, and a treated wafer can be used to produce multiple films, indicating that at best minimal amounts of the polyelectrolyte are added to the film. The process has thus far been shown to be limited in scalability only by the size of the coating equipment, and is expected to be readily scalable to industrial processes. In this study, the protocol for making the solutions, preparing the deposition surface, and producing the films is described. Video LinkThe video component of this article can be found at

Multimicrometer Noncovalent Monolayer Domains on Layered Materials through Thermally Controlled Langmuir–Schaefer Conversion for Noncovalent 2D Functionalization

“…Utilization of noncovalent monolayers to control 2D material surface chemistry in scalable industrial processes such as solution- and spray-coating elevates the importance of robustness toward a range of solvents. ,, In most classes of monolayers, molecular desorption occurs orders of magnitude more rapidly at defects, − suggesting the importance of long-range order. Long-range molecular alignment in the monolayer also has the potential to improve function, similar to performance gains achieved in other classes of film structures through long-range structural control. − …”

Carbonic Anhydrases: Role in pH Control and Cancer

“…In addition, two of the membrane-bound CAs have been shown to be important for tumorigenesis [ 3 , 33 , 34 , 35 , 36 , 37 , 38 , 39 , 40 , 41 ]. CAs have also gained industrial interest as biocatalysts for carbon sequestration of fuel-gas and CO 2 gas exchange in artificial lungs [ 42 , 43 , 44 , 45 , 46 , 47 ]. All of these applications are possible because of the favorable properties of CAs such as “fast” enzyme kinetics, easy expression, high solubility, and intermediate heat resistance [ 4 , 48 ].…”

Modeling the mechanical properties of ultra-thin polymer films

“…Freestanding polyvinyl formal films with a thickness of 10–100 nm were made by a spin coating method, as described in detail elsewhere [16, 17] . In brief, a solution of 0.25 wt% Vinylec E (SPI Supplies, West Chester, PA) in ethyl lactate (98%, Sigma-Aldrich, St. Louis, MO) was spin coated onto Si wafers pretreated with polydiallyldimethylammonium chloride PDAC (Sigma-Aldrich St. Louis, MO.…”