Failure Analysis Enhancement by Incorporating a Compact Scan Diagnosis System

Abstract

The failure analysis community working on highly integrated mixed signal circuitry is entering an era where simultaneously System-On-Chip technologies, denser metallization schemes, on-chip dissipation techniques and intelligent packages are being introduced. These innovations bring a great deal of defect accessibility challenges to the failure analyst. To contend in this era while aiming for higher efficiency and effectiveness, the failure analysis environment must undergo a disruptive evolution. The success or failure of an analysis will be determined by the careful selection of tools, data and techniques in the applied analysis flow. A comprehensive approach is required where hardware, software, data analysis, traditional FA techniques and expertise are complementary combined [1]. This document demonstrates this through the incorporation of advanced scan diagnosis methods in the overall analysis flow for digital functionality failures and supporting the enhanced failure analysis methodology. For the testing and diagnosis of the presented cases, compact but powerful scan test FA Lab hardware with its diagnosis software was used [2]. It can therefore easily be combined with the traditional FA techniques to provide stimulus for dynamic fault localizations [3]. The system combines scan chain information, failure data and layout information into one viewing environment which provides real analysis power for the failure analyst. Comprehensive data analysis is performed to identify failing cells/nets, provide a better overview of the failure and the interactions to isolate the fault further to a smaller area, or to analyze subtle behavior patterns to find and rationalize possible faults that are otherwise not detected. Three sample cases will be discussed in this document to demonstrate specific strengths and advantages of this enhanced FA methodology.

Maximizing ATPG Diagnosis Resolution on Unique Single Failing Devices

“…On both case studies, electrical characterization of the digital core was performed using a compact scan diagnostic tester [1], a bench top tester that is suitable to fit in the chamber of any fault isolation tools. This compact test hardware (HW) allows for easy manipulation of test parameters like voltages, timings, and editing the test settings and results.…”