Fault logic circuit design of switching power supply based on soft reference circuit module

Abstract

The basic idea of the circuit fault diagnosis method based on fault logic is to establish a computer expert database system first, connect the computer to the GPIB interface card, and then connect each intelligent instrument through the GPIB standard bus. Through the connection of the tested object adapter and the tested object, a circuit fault expert diagnosis and test platform are formed. Based on the traditional fault simulation model, this paper improves the fault logic circuit of switching power supply, designs the system model of fault simulation, deals with the logic structure and circuit hierarchy respectively, and produces the final output through the logic gate circuit by comparing the results of the fault logic circuit and the fault-free logic circuit. The designed switching power supply fault logic circuit works in the switching state, which has the characteristics of low loss and high energy conversion efficiency. Through the simulation analysis, the output is connected to the comparator, which plays the role of the whole wave. The simulation results are in line with the parameter indicators. The functional test results of the chip show that the function of the module is basically normal, which has practical application value and good portability and can be used as a reference for similar electrical designs.

Research on Surge Suppression of Timing Fuze Timing Starting Point Based on NMOSFET Device

“…NMOSFET is a voltage-controlled device equivalent to the circuit shown in Figure 7 (N-channel enhanced insulated gate semiconductor field effect transistor). When C GS , C GD , and C DS are NMOSFET gate-source capacitance, gate-drain capacitance (Miller capacitance), and drain-source capacitance, is NMOSFET parasitic capacitance, inherent properties, the parasitic capacitance will affect the switching speed of NMOSFET [10][11][12] .…”