FEM-Based Evaluation of the Point Thermal Transmittance of Various Types of Ventilated Façade Cladding Fastening Systems

Solar chimneys can help to reduce solar heat gain on a building envelope and to enhance natural ventilation. In this work, we proposed three configurations of two solar chimneys combined with a heated wall for the natural ventilation of a room: (I) the chimneys are connected serially, (II) the chimneys are parallel and exhaust air at two separate outlets, and (III) the chimneys are parallel, but the outlets are combined. The airflow rate achieved with each configuration was predicted with a Computational Fluid Dynamics model. The results show the effects of the heat flux in each channel and the geometries of the channels. Configuration (II) shows the highest flow rate. Particularly, the proposed configurations enhance the flow rate significantly and up to 40% when compared to the typical setup with a single channel solar chimney. The findings offer a novel design option for building façades for reducing solar heat gain and enhancing natural ventilation.

Section: Introductionmentioning

confidence: 99%

CFD Analysis of Different Ventilation Strategies for a Room with a Heated Wall

Nguyen

Tran

et al. 2022

Thermal Performance of the Building Envelope: Original Methods and Advanced Solutions

Evola,

Lucchi

2024

Thermal Performance Analysis and Design Evolution of Ventilated Stone Facades: A Case Study of the Praski Student House (Akademik Praski) in Warsaw

Sobieraj,

Metelski,

Rosłon

2024

The rationale for this work arose from the urgency of improving the energy efficiency of buildings at the design stage, given the changing requirements of energy efficiency standards such as the Polish Technical Conditions (WT 2014 and WT 2020). This research is novel as there is currently limited information available on the improvement of the thermal performance of ventilated stone facade systems, although they are now widely used due to their practical and aesthetic advantages. The first objective of this work is to evaluate the thermal performance of the ventilated facades of the Praski Student House (Akademik Praski) and to assess how certain design variations can help achieve a lower level of energy consumption. Using a comprehensive case study approach, this study provides accurate thermal calculations of the facade to assess its global thermal insulation coefficient (Rt) and thermal transmittance (Uc). The improvement in the actual U-value from the original design is as follows: the U-value is reduced from 0.33 originally to 0.228 for WT 2014 and to 0.198 for WT 2020, showing a reduction of about 30.9% and 13.2%, respectively. These results indicate the energy efficiency of increased insulation thickness and optimally oriented air gap dimensions. The practical contributions of this research are valuable for architects, engineers, and contractors involved in the design and construction process of buildings aiming to achieve near-zero energy buildings (nZEBs), including concrete suggestions on how to improve current construction practices as well as material recommendations. There is a need for durability studies, for example to assess the performance of such facades under different climatic conditions, as part of future work to support these findings.