Fibriform polyaniline/nano-TiO2 composite as an electrode material for aqueous redox supercapacitors

Synthesis and pseudocapacitive studies of composite films of polyaniline and manganese oxide nanoparticles

“…In recent years, considerable efforts have been placed to couple the unique advantages of these capacitive materials for SCs [18][19][20][21][22][23]. The synthesis and studies of composites of PANI and MnO 2 have attracted much attention due to the low cost and environment friendliness of the active materials.…”

“…The synthesis and studies of composites of PANI and MnO 2 have attracted much attention due to the low cost and environment friendliness of the active materials. The PANI-MnO 2 composite films have been synthesized using different chemical methods [19,[24][25][26][27][28][29]. The PANI not only serves as an electroactive material for energy storage but also a good coating layer to restrain MnO 2 from dissolution in acidic electrolytes [24].…”

Electrochemical oxidation of aniline on the surface of an amorphous metal alloy Al87Ni8Y5

“…The high intensity of this peak points to the high degree of doping of this polymer, i.e., the presence of the perg raniline salt [40,45]. The splitting of this band is prob ably caused by the interface interaction of PANI mol ecules with the species formed in the dissolution of both the oxide film and the electrode surface [46].…”

Heat transfer intensification using polyaniline based nanofluids: Preparation and application

“…Initially, the surfactant and initiator solutions were prepared separately by adding 0.3 g sodium dodecyl sulphate (SDS) in 100 mL deionized water and 7.3 g of ammonium persulphate (APS) in 50 mL of deionized water, respectively [21]. Both solutions were transferred to the sonochemical reactor.…”

“…Polyaniline (PANI) is the most investigated conducting polymer owing to its better conducting properties, ease of doping process, environmental stability and potential applications in electrochemical devices [16][17][18][19][20][21][22][23]. The agglomeration and stability issues can be eliminated, if a conducting polymer colloidal suspension is used in place of the metal/metal oxide.…”