Formation of high density TiN nanocrystals and its application in non-volatile memories

Abstract

Non-volatile memory based on TiN nanocrystal (TiN-NC) charge storage nodes embedded in SiO2 has been fabricated and its electrical properties have been measured. It was found that the density and size distribution of TiN-NCs can be controlled by annealing temperature. The formation of well separated crystalline TiN nano-dots with an average size of 5nm is confirmed by transmission electron microscopy and x-ray diffraction. x-ray photoelectron spectroscopy confirms the existence of a transition layer of TiNxOy/SiON oxide between TiN-NC and SiO2, which reduces the barrier height of tunnel oxide and thereby enhances programming/erasing speed. The memory device shows a memory window of 2.5V and an endurance cycle throughout 105. Its charging mechanism, which is interpreted from the analysis of programming speed (dVth/dt) and the gate leakage versus voltage characteristics (Ig vs Vg), has been explained by direct tunnelling for tunnel oxide and Fowler–Nordheim tunnelling for control oxide at programming voltages lower than 9V, and by Fowler–Nordheim tunnelling for both the oxides at programming voltages higher than 9 V.

Kinetics of titanium nitride synthesized with Ti and N2

“…The ultra-fine TiN powder, which can be used as reinforcement for metal matrix composites, exhibits a great development value and application prospect [1][2][3][4]. The conventional synthesis of TiN involves direct nitridation, laser cladding, selfpropagating high-temperature synthesis and mechanical milling [5,6].…”