Growth, structural, Raman, and photoluminescence properties of rutile TiO2 nanowires synthesized by the simple thermal treatment

Preparation of Highly Crystalline TiO2 Nanostructures by Acid-assisted Hydrothermal Treatment of Hexagonal-structured Nanocrystalline Titania/Cetyltrimethyammonium Bromide Nanoskeleton

“…The rutile phase has been widely used for pigment materials because of its chemical stability. However, the anatase phase has been widely used in photodegradation due to its high photoactivity [1,4,6-8]. The majority of the applications of TiO 2 are strongly influenced by the crystalline phase [9].…”

Synthesis, optical and photoelectrical characterizations of the novel 10-chloro-6H,8H-dichromeno[2,3-b:3′,4′-e]pyridine-6,8-dione (CDPD) and its photodiode application

“…A sharp single peak in the Vis region is observed and centered at around 683 nm. The strong PL intensity indicates the enhanced optical characteristic and less defect densities in the materials [28,29]. Another two peaks were observed at 417 and 386 nm.…”

Root growth of TiO2 nanorods by sputtering

“…As the nanorod nucleation and growth is depended on film stress, it is natural that the Au layer thickness will affect the nanorod growth density [10]. In fact the average nanorod density increased with increasing Au layer thickness, which is shown in Fig.…”

“…Various methods such as sol-gel, oxidation, hydrothermal synthesis, CVD, evaporation, etc. have been used for the growth of TiO 2 nanorods/nanowires [8][9][10][11][12][13][14][15]. Though sputtering is one of the most commonly used methods, so far there has been no report of sputter growth of nanorods.…”