High-aspect-ratio bulk micromachining of titanium

Abstract

Recent process developments have permitted the highly anisotropic bulk micromachining of titanium microelectromechanical systems (MEMS). By using the metal anisotropic reactive ion etching with oxidation (MARIO) process, arbitrarily high-aspect-ratio structures with straight sidewalls and micrometre-scale features have been bulk micromachined into titanium substrates of various thicknesses, ranging from 0.5-mm sheet down to 10-microm free-standing titanium foils. Bulk micromachined structures are generally free of residual stresses and are preferred when large, rigid, flat and/or high-force actuators are desired. However, so far there has been a limited ability to select materials on the basis of specific application in bulk micromachining, primarily because of the predominance of MEMS processes dedicated to single-crystal silicon, such as silicon deep reactive ion etching. The MARIO process permits the creation of bulk titanium MEMS, which offers potential for the use of a set of material properties beyond those provided by traditional semiconductor-based MEMS. Consequently, the MARIO process enables the fabrication of novel devices that capitalize on these assets to yield enhanced functionalities that would not be possible with traditional micromechanical material systems.

Recent Advances in Vapor Chamber Transport Characterization for High-Heat-Flux Applications

“…Relative to other potential materials, titanium offers excellent corrosion resistance, light weight, high fracture toughness, and can be used as the substrate for microfabrication of high-aspect-ratio wick features [191].…”

Computation of Beam Stress and RF Performance of a Thin Film Based Q-Band Optimized RF MEMS Switch

“…The contact area of the membrane has holes to decrease air damping [5]. Biaxial residual stress is not present in a micromachined membrane that has holes [6]. The contact area of the membrane is connected with two parts that come in to contact with the electrodes.…”

“…Researchers have proposed various designs that solve the MEMS issues [6]. Various types for RF MEMS switches address issues like low voltage and reliability concerns, because the primary engineering concepts only deal with the design of the beam.…”

Ultrathin TiN Membranes as a Technology Platform for CMOS‐Integrated MEMS and BioMEMS Devices

“…However, thin layers, such as nitride coatings, usually bear significant residual stresses that may reach into the GPa range, [ 8 , 9 ] calling for either stresscontrolled designs [ 10 ] or the fabrication of actuators from bulk material. [ 11 ] The situation is complicated by the fact that even the precise determination of elastomechanical constants of stressed layers is a challenging task and only few techniques are available.…”