High-Temperature Oxidation Behaviour of CrSi Coatings on 316 Austenitic Stainless Steel

Abstract

In this study, a closed-field unbalanced magnetron sputtering system, which is environmentally friendly and has high deposition efficiency, was used to deposit CrSi coatings on 316 austenitic stainless steel. This system utilised separate Cr and Si targets, and the appropriate content of Cr and Si of the coatings was adjusted by changing the currents applied to the targets. A series of CrSi coatings with different Si/Cr ratios were produced, and their oxidation behaviour at elevated temperatures was investigated. By analysing the weight gain, surface morphology and microstructure, composition and phase constituents, the oxidation behaviour at 600 °C, 700 °C and 800 °C was investigated and the optimized coating to protect the stainless steel has been identified. The outcome of the research indicated that a small amount of Si (between 4–7 at.%) in Cr coatings is effective in protecting the austenitic stainless steel against oxidation at high temperatures, while a high Si content (around 10 at.% or more) makes the coating more brittle and prone to cracking or delamination during oxidation at 800 °C.

Study on High-Temperature Oxidation Behavior of Platinum-Clad Nickel Composite Wire

“…Scientists have produced a significant amount of research on high-temperature protection coatings of nickel and nickel alloys, including the selection of coating materials [7,8], coating preparation [9,10], coating modifications [11,12], properties [13,14], and oxidationresistance mechanisms [15,16]. These research results have promoted the development of high-temperature protection fields and also provided guidance for the development of this project.…”